Read Sharp AR-P16 (serv.man7) User Guide / Operation Manual online
INSTALLING THE PRINTER DRIVER AND UTILITIES (SOFTWARE INSTALLATION)
9
Installation method 3
Use this procedure to install the software in the following environments:
1. The printer is connected by USB cable or parallel cable.
2. Windows version: Windows 95/98/Me/NT 4.0*
2. Windows version: Windows 95/98/Me/NT 4.0*
1
/2000*
1
Install the software as follows.
Installing the software in Windows 95/98/Me or Windows NT 4.0/2000
(USB/parallel interface)
(USB/parallel interface)
Install the software as follows.
Before starting the installation, make sure the USB or parallel interface cable is not connected to the machine.
Before starting the installation, make sure the USB or parallel interface cable is not connected to the machine.
1
Insert the "PRINTER UTILITIES" CD-ROM
that accompanied the machine into your
CD-ROM drive.
that accompanied the machine into your
CD-ROM drive.
2
Double-click [My Computer], and then
double-click the CD-ROM icon.
double-click the CD-ROM icon.
3
Double-click the [SETUP] icon.
4
Follow the on-screen instructions.
●
●
●
● More information on installation
(1) To install the following items, select "User
Tools" in the "Tool Selection" screen.
PCL5c Printer Driver, PCL Display Font, Printer
Status Monitor
PCL5c Printer Driver, PCL Display Font, Printer
Status Monitor
(2) To install the following items, select
"Administrator Tools" in the "Tool Selection"
screen.
Printer Administration Utility
screen.
Printer Administration Utility
(3) In the package selection screen, select the
checkboxes of the items that you wish to install.
(4) In the cable selection screen, select "USB" or
"Parallel" and click the [Next] button.
This screen does not appear in Windows 95/NT
4.0.
4.0.
(5) When you connect the machine to your
computer by USB cable or parallel cable, your
computer will detect the machine and the Plug
and Play window will appear. Follow the
instructions in the Plug and Play window to
install the printer driver. (To connect the cable,
see page 12.)
computer will detect the machine and the Plug
and Play window will appear. Follow the
instructions in the Plug and Play window to
install the printer driver. (To connect the cable,
see page 12.)
NOTE
*1 To install the software using the installer, you must have administrator's rights.
*1 To install the software using the installer, you must have administrator's rights.
NOTE
If "Hardware Found" or "Found New Hardware
Wizard" appears during the software installation, be
sure to click the [Cancel] button.
Wizard" appears during the software installation, be
sure to click the [Cancel] button.
NOTE
If a digital signature warning message appears in
Windows 2000 (this may appear several times), click
the [Yes] button.
Windows 2000 (this may appear several times), click
the [Yes] button.
NOTE
If you are using a parallel cable, make sure that the
machine and your computer are turned off before
connecting the cable.
machine and your computer are turned off before
connecting the cable.
Whale_inst_EX.book 9 ページ ２００２年１１月１３日 水曜日 午後６時２５分
Click on the first or last page to see other AR-P16 (serv.man7) service manuals if exist.