Read Sharp AR-P15 (serv.man7) Technical Bulletin online
1) Configure the AR-P15 for the network.
Before the AR-P15 can be installed on Windows 2000, the AR-P15 must have a valid IP address and
subnet mask.
Complete the following steps to set the IP address from the Sharp Digital Copier LCD panel
On the Control Panel of the AR651/810 copier, press the Printer/Network key. The Print or Print/Scan
menu is displayed.
Before the AR-P15 can be installed on Windows 2000, the AR-P15 must have a valid IP address and
subnet mask.
Complete the following steps to set the IP address from the Sharp Digital Copier LCD panel
On the Control Panel of the AR651/810 copier, press the Printer/Network key. The Print or Print/Scan
menu is displayed.
Press the On/Off menu on the Touch Screen and take the controller Offline. Enter the Setting menu
and press Admin.
Enter the “Admin” password.
Note: When you set-up the AR-P15 for the first time, an “Admin” password is not set.
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 074a
Page: 2 of 16
Click on the first or last page to see other AR-P15 (serv.man7) service manuals if exist.