Read Sharp AR-NS2 (serv.man3) User Guide / Operation Manual online
TABLE OF CONTENTS
16
SENDING AN IMAGE
BASIC TRANSMISSION METHOD
1
Make sure the machine is in scanner
mode.
mode.
When the [IMAGE
SEND] key light is on,
the machine is in
scanner mode. If the
light is not on, press the
[IMAGE SEND] key.
SEND] key light is on,
the machine is in
scanner mode. If the
light is not on, press the
[IMAGE SEND] key.
2
Load the original.
For detailed information
on loading an original,
refer to page 4-6 of
"Operation manual (for
general information and
copier operation)".
on loading an original,
refer to page 4-6 of
"Operation manual (for
general information and
copier operation)".
3
Check the original size.
The original size is
automatically detected.
If you loaded a non-
standard size document
or wish to change the
scanning size, touch the
[ORIGINAL] key and set
the document size.
(Refer to
automatically detected.
If you loaded a non-
standard size document
or wish to change the
scanning size, touch the
[ORIGINAL] key and set
the document size.
(Refer to
page 20
.)
4
If needed, adjust the resolution setting.
(Refer to
(Refer to
page 22
.)
The initial factory setting
is "LOWER".
is "LOWER".
5
If needed, adjust the exposure setting.
(Refer to
(Refer to
page 21
.)
The initial factory setting
is "AUTO".
is "AUTO".
6
If needed, select the file format. (Refer to
page 23
.)
The initial factory setting
is "PROGRAMMED".
is "PROGRAMMED".
7
Touch the [SENDER LIST] key.
This step is not
necessary for Scan to
FTP or Scan to Desktop.
Go directly to
necessary for Scan to
FTP or Scan to Desktop.
Go directly to
step 10
(page 17).
8
Touch a key to select a sender.
The touched key is
highlighted. If you made a
mistake, touch the correct
key. The highlighting will
move to the new key.
The selected sender will be
the sender of the e-mail.
highlighted. If you made a
mistake, touch the correct
key. The highlighting will
move to the new key.
The selected sender will be
the sender of the e-mail.
9
Touch the [OK] key.
NOTE
You cannot load documents in both the reversing
automatic document feeder and on the document
glass and send them in a single transmission.
automatic document feeder and on the document
glass and send them in a single transmission.
NOTE
●
To scan a two-sided original (when a reversing
automatic document feeder is installed), refer to
automatic document feeder is installed), refer to
page 19
.
●
To rotate the document image 90° before
transmission, see
transmission, see
page 20
.
AUTO A4
ORIGINAL
LOWER
RESOLUTION
PROGRAMMED
FILE FORMAT
AUTO A4
ORIGINAL
LOWER
RESOLUTION
EXPOSURE
PROGRAMMED
FILE FORMAT
NOTES
●
You can omit selection of a sender (go directly to
step 10
). In this case, the default sender
information stored with the key operator program
is automatically transmitted. (
is automatically transmitted. (
page 38
)
●
Up to 20 senders can be stored using the Web
page. (
page. (
page 12
)
AUTO
A4
LOWER
RESOLUTION
AUTO
EXPOSURE
PROGRAMMED
FILE FORMAT
AUTO A4
ORIGINAL
LOWER
RESOLUTION
EXPOSURE
PROGRAMMED
FILE FORMAT
DIRECTORY
ADDRESS REVIEW
SENDER LIST
-MAIL ADDRESS
2 GROUP
SHARP PPD
1 GROUP
DER LIST
1 GROUP
OK
Click on the first or last page to see other AR-NS2 (serv.man3) service manuals if exist.