AR-NS2 (serv.man21). ARNS1 2-002 Setting up an NT4 Exchange server for Axis 700 7000 ARNS1 2 - Sharp Copying Equipment Technical Bulletin (repair manual). Page 6

Sharp Electronics (UK) Ltd., NIS Systems Support

NIS Bulletin 033.doc

Page:  6 of 15

Now that the Exchange SMTP service is configured, the AXIS device has to be setup to communicate
with the Exchange server.

(1)  Open a web browser and enter the IP Address that has been already assigned to the AXIS

device. Refer to NIS Bulletin 009 for instructions of how to set an IP Address in the AXIS
700/7000.

(2)  Click on Admin and enter root as the user name and pass as the password (both lowercase).

(3) Click 

on 

Network Settings and then on Detailed View. The following screen will appear.

(4)  We now have to set the name of the domain in which the Exchange server is located and the IP

Address of the server that is running DNS. At this point it would also be beneficial to enter the
server IP Address that is running the WINS service. Below is an example configured screen shot.