Read Sharp AR-NC5J (serv.man6) User Guide / Operation Manual online
6-6
Using in UNIX Environment
Print Server Card
Users Manual
Using in Solaris 2.3x - 2.5x Environment
This section explains how to print in Solaris2.5x or earlier version environment. The instruction below is an
example for SUN Solaris2.4. Commands and paths may differ according to the OS version. Please refer to the
manual of your workstation.
* Though Remote Printer can be configured from OpenWindows with Admintool, it is not
available for Print Server Card because the destination and queue name input here can not be
distinguished. We recommend to setup by command according to the method below.
1. Create Print Queue
1-1.
Login as root.
# login root
1-2.
Stop print scheduler.
# /usr/sbin/lpshut
1-3.
Add print server.
Ex. Add host name "pbox".
# /usr/sbin/lpsystem -RO -t bsd pbox
1-4.
Setup print queue .
Ex. Add print queue name "pboxlp"
# /usr/sbin/lpadmin -p pboxlp -s pbox!lp
* If you use csh, use "\!" instead of "!" .
1-5.
Start print scheduler.
# /usr/bin/sh /etc/init.d/lp start
1-6.
Enable print queue.
# /usr/sbin/accept pboxlp
# /usr/bin/enable pboxlp
TIP
NOTE
(Print Queue Name) (Host Name)
(Logic Printer Name)
Click on the first or last page to see other AR-NC5J (serv.man6) service manuals if exist.