AR-NC5J (serv.man32). ARNC5J-002 Installation of the ARNC5J on a Windows NT4 Network. - Sharp Copying Equipment Technical Bulletin (repair manual). Page 3

Sharp Electronics (UK) Ltd., Network Systems Support

NIS Bulletin 041.doc

Page:  3 of 15

4.  If the TCP/IP Protocol is not already in the list of protocols, perform the following steps:

• Click 

 

•  Double click on TCP/IP Protocol.

•  Insert the Windows NT CD-ROM or enter the equivalent source path.

•  Enter the TCP/IP address, Subnet Mask, and Default Gateway as supplied by the Network

Administrator.

5.  Click on the Services tab to verify Microsoft TCP/IP Printing is installed. If Microsoft TCP/IP

Printing is not already installed, perform the following steps.

• Click 

• Double-click 

on 

•  Insert the Windows NT CD-ROM or enter the equivalent source path as requested.

6. Click 

OK to close the Network applet and reboot the PC to load the service. Note, that although

NT4 tells you that a reboot is required the service will still work even if you do not reboot.
Although this is not recommended it could be useful for those customers that cannot reboot
during the day.