AR-NC5J (serv.man28). Modified ARNC5J-003 Installation of the ARNC5J on a Windows 2000 Network - Sharp Copying Equipment Technical Bulletin (repair manual). Page 16

 

Sharp Electronics (UK) Ltd., Network Systems Support 

 

NIS Bulletin 042a.doc 

 

Page:  16 of 19 

Alternatively, the Sharp Auto Installer could have been used to install the print driver. To Use the 
Sharp Auto Installer insert the CDROM containing the printer drivers. If your CDROM drive is set to 
autorun CD’s, the program will start automatically. If the program does not start, browse to the CD 
and click on Setup.exe. 
 
The following screens will appear. Follow through the prompts to install the printer. 
 

 

 
 
After you have selected either the PCL5e or PCL6 printer driver, click on Next and again follow the 
prompts.  
 
Note: 
Within the installer you are not given the option to set-up a new port. Because of this, you will either 
need to set up a port prior to running the installer or set the driver to LPT1 during the installer and 
then set up a Standard TCP/IP Port and redirect the driver afterwards. 
 
The Postscript Printer driver is not included on the standard CD. A separate CD accompanies the 
Postscript option and this CD includes the Postscript print driver.