Read Sharp AR-NC5J (serv.man10) User Guide / Operation Manual online
2-9
About Print Server Card
Print Server Card
Users Manual
NetWare
NetWare
NetWare
NetWare
NetWare
Job Timeout (sec.)
Job Timeout (sec.)
Time Out (Second)
10
Time in seconds for Print Server Card to recognizes the
end of a job in remote printer mode. We recommend
default time.
Telnet
Web page
NICManager
NetWare Protocol
NetWare Protocol
Use NetWare
Protocol
ENABLE
Enable or disable NetWare protocol. This will influence the
ability to use print server, remote printer and
Setup Utility (for IPX/SPX).
Frame Type
Frame Type
Frame Type
802.2
Setup default frame type used by Print Server Card. When
Print Server Card can not operate with the frame type set
up, it will automatically change to different frame type.
Operation Mode
Operation Mode
Operation Mode
PSERVER
Setup operation mode(print server/remote printer) for Print
Server Card. When Print Server Card can not operate with
the operation mode set up, it will automatically change to
different operation mode.
Printer Name
Printer Name
Printer Name
SCxxxxxx-prn1
(xxxxxx is last six
number of Ethernet
address.)
Setup “Printer” name which will be registered to NetWare
server. This name must be same as the “Printer” name
registered to NetWare server.
Print Server Name
Print Server Name
Print Server Name
SCxxxxxx (xxxxxx is
last six number of
Ethernet address.)
Setup print server name when Print Server Card is working
in print server mode. This name will be used to identify the
printer within the network when using NetWare protocol.
Therefore set up individual name. The name will be used
as login name when logging into the NetWare server.
Login Password
Login Password
Password
None (no password) Set the password for Print Server Card to log in to the file
server. The password can be up to 31 letters. If you set
password for Print Server Card, you must set the same
password on file server (You can set the password on file
server in PCONSOLE). When you want Print Server Card
to connect to several file server, all the passwords must be
the same.
*Note: Print Server Card has default password of null.
Therefore you can set password to Print Server Card but
not in “Printserver Information” and still manage to connect
and print. However, this is a very special situation and we
recommend that you put same password in Print Server
Card and “Print Server Information”.
Job Polling (sec.)
Job Polling (sec.)
Job Polling Time
(Second)
4
Set the interval to check for print jobs. We recommend
default time.
Bindary Mode
Bindary Mode
Bindary Setup
ENABLE
Select whether to use bindery mode or not. If you do not
check the box, only NDS mode will be used. Unless you
want to use only NDS mode, check the box for Bindery
Setup.
FSERVER Name 1-8 FSERVER Name 1-8 File Server to be
connected
""
You may define the name of the file server the printer
connects to with up to 31 letters. Once you setup the file
server name the Print Server Card will connect to the
server. If this section is left as blank, Print Server Card will
search for a server and connect to it.
NDS Tree
NDS Tree
NDS Tree
""
Specify the NDS tree. Normally, Print Server Card will
automatically detect the tree name. However, when there
are several trees existing within the network, you must add
the name.
NDS Context
NDS Context
NDS Context
""
Specify the context used by NDS in print server mode. Add
the context on the file server which that you created the
print server.
PSERVER Name 1-8 PSERVER Name 1-8 Print Server to be
connected 1-8
""
You may define the name of the print server to which the
Print Server Card connects. Once you setup the print
server name, the Print Server Card will connect to it. If this
section is left as blank, Print Server Card will automatically
search for server and connect to it.
Factory Default
Name
Explanation
Click on the first or last page to see other AR-NC5J (serv.man10) service manuals if exist.