Read Sharp AR-NC1D (serv.man15) Technical Bulletin online
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 005.doc
Page: 2 of 5
5. The Wizard will now request the communications port:
NOTE:
LPT1 through LPT3 are local parallel ports. COM1 through COM4 are local serial ports. LPT1
would be chosen if the AR-PB2 was connected directly to this workstation with a parallel cable.
LPT1 through LPT3 are local parallel ports. COM1 through COM4 are local serial ports. LPT1
would be chosen if the AR-PB2 was connected directly to this workstation with a parallel cable.
Click the Add Port button to add a network port as a doorway to the AR-PB2/+ and ARNC1D/3D.
6. A list of available printer ports is displayed. Double click on LPR Port. If the LPR Port is not
available, the TCP/IP Printing Service is not installed. TCP/IP Printing Service is installed from
the Control Panels/Network utility, under the Services tab. If this service has to be installed, the
Windows NT CD will be required, and the files server will require rebooting.
the Control Panels/Network utility, under the Services tab. If this service has to be installed, the
Windows NT CD will be required, and the files server will require rebooting.
7. An LPR setting window will show up requiring two fields, the IP address of the ARNC1D/3D and
the Printer Queue name.
Use the following steps to check / set an IP address and subnet address on the ARNC1D/3D
network interface card.
network interface card.
•
With the AR-PB2/+ and the ARNC1D/3D installed in the copier, press the following keys on the
copiers operation panel, in the order shown.
PRINT -> OFFLINE-> MENU-> NETWORK-> SETTING-> IP ADDRESS SETTING
IP SUBNET ADDRESS
IP GATEWAY ADDRESS
IP GATEWAY ADDRESS
Click on the first or last page to see other AR-NC1D (serv.man15) service manuals if exist.