Read Sharp AR-NB3 (serv.man4) Service Manual online
AR-NB3
SPECIFICATIONS
1 – 6
(5) Recipient registration
• The mail address registered for each destination can be selected
from the mail address which is searched using LDAP.
• The information for each recipient includes the recipient name, IP address
or mail address, scanning size, format type, and scan parameter.
(6) Scanning size
• The scanning size is the size of the document sensed or predeter-
mined by the main unit(copier).
• If there is no information available about the document size from the
main unit(copier), scanning is performed according to the scanning
size predetermined in the destination registration section in advance.
However, a detected or predetermined document size takes prece-
dence over the information predetermined.
size predetermined in the destination registration section in advance.
However, a detected or predetermined document size takes prece-
dence over the information predetermined.
(7) Scanner limitations
• This unit should be connected to the USB port (USB-2) on the dual
function board of the main unit(copier).
C.
FUNCTIONS BY INTERFACE
When the network expansion kit is connected, the following functions
are available by system interface.
(*1): PS requires soft keys of the AR-PK1.
(*2): Some functions are not available.
D.
NETWORK SETUP
Network setups should be performed by the system administrator. Use
a setup tool such as TCP/IP, Netware, Ether Talk or Web interface.
a setup tool such as TCP/IP, Netware, Ether Talk or Web interface.
E.
SOFTWARE SETUP
The network expansion kit can be installed by setting up NIC, installing
a printer driver with the total installer, and installing Sharpdesk.
a printer driver with the total installer, and installing Sharpdesk.
(1) Installing driver
The network expansion kit printer is connected only through the net-
work. The port setup required for installing a printer driver is the network
only. The following items should be set up.
work. The port setup required for installing a printer driver is the network
only. The following items should be set up.
• TCP/IP peer-to-peer port
1) Search for the network expansion kit on the network and select the
network expansion kit you want or enter the IP address of the appli-
cable network expansion kit to create a TCP/IP port.
cable network expansion kit to create a TCP/IP port.
2) Install the driver to the created port.
• Windows printer shared port
When the setup of the above client PC is completed and the printer is
set to "Windows shared printer," other client PCs can select this
printer shared port and then proceed to installation of the driver.
set to "Windows shared printer," other client PCs can select this
printer shared port and then proceed to installation of the driver.
F.
HARDWARE SETUP
1) Requirements for connecting network expansion kit
• Dual function board mounted model is recommended
• Dual function board is surely required for network scanning
2) Connection to the main unit(copier)
• When Dual function board is used, connects with USB2.0 port of a
main unit(copier).
3) Power supply
Supplied by the main unit
System I/F
(main unit)
(main unit)
AR-NB3 I/F
Function
SPLC
GDI
PCL5e/6
PS (*1)
Net
Scan
USB2.0
RJ45 (LAN)
No
No
Yes
Yes
Yes
USB1.1
À
Yes
No
No
No
No
IEEE1284
À
Yes
No
No
No
No
USB2.0
À
No
No
Yes
Yes
No
USB1.1
RJ45 (LAN)
Yes
No
No
No
No
IEEE1284
À
Yes
No
No
No
No
USB1.1
RJ45 (LAN)
No
No
Yes (*2)
Yes (*2)
No
IEEE1284
À
No
Yes
No
No
No
Click on the first or last page to see other AR-NB3 (serv.man4) service manuals if exist.