Read Sharp AR-NB2 (serv.man14) User Guide / Operation Manual online
3
PRINTING FROM MACINTOSH
23
C O N T E N T S
I N D E X
Basic printing
(part 3)
If the tray runs out of paper during printing
Add paper to the tray or press the [TRAY SELECT] key (
) to
select a different tray, and then press the [ON LINE] key (
) to
resume printing. Note that if the "Auto tray switching" setting in
the user programs is enabled and there is the same size of
paper in another tray, the machine will automatically switch to
the other tray and continue printing.
the user programs is enabled and there is the same size of
paper in another tray, the machine will automatically switch to
the other tray and continue printing.
Pausing a print job
To pause a print job during printing, press the [ON LINE] key
(
(
) on the operation panel to switch the machine off-line.
Printing will be paused and the ON LINE indicator will blink.
●
To cancel a print job, press the [CLEAR] key (
) or the
[CLEAR ALL] key
(
)
.
●
To resume printing, press the [ON LINE] key (
) to switch the
machine online.
When "Paper Feed" is set to "Auto Select"
If "Paper Feed" is set to "Auto Select" in the Print window and
the correct size of paper is not loaded in the machine, the
printing procedure will vary depending on the "Use Close Paper
Size" setting in the user programs (see "USER PROGRAMS" in
the Operation Manual).
the correct size of paper is not loaded in the machine, the
printing procedure will vary depending on the "Use Close Paper
Size" setting in the user programs (see "USER PROGRAMS" in
the Operation Manual).
When "Use close paper size" is disabled
The PAPER SIZE indicator on the
operation panel will blink. You can press
the [TRAY SELECT] key (
operation panel will blink. You can press
the [TRAY SELECT] key (
) to select a
tray manually, or load paper in the
bypass tray and press the [ON LINE]
key (
bypass tray and press the [ON LINE]
key (
) to begin printing.
* The paper sizes that appear in the
operation panel will vary by country and region.
When "Use close paper size" is enabled
Printing will take place using a size of paper that is close to the
size of the print image.
size of the print image.
When the dual function board is installed and the
network expansion kit is connected to the machine's
USB 2.0 connector, the print image is automatically
rotated to fit the paper in the event that the paper is
loaded in an orientation different from the print image.
network expansion kit is connected to the machine's
USB 2.0 connector, the print image is automatically
rotated to fit the paper in the event that the paper is
loaded in an orientation different from the print image.
ORIGINAL
SIZE
SIZE
PAPER
SIZE
11
X
17
8½
X
14
8½
X
11
8½
X
11
8½
X
5½
EXTRA
Note
Click on the first or last page to see other AR-NB2 (serv.man14) service manuals if exist.