AR-NB2 (serv.man14). Network printing guide, for AR-NB2 - Sharp Copying Equipment User Guide / Operation Manual. Page 17

The "Software" CD-ROM contains the following two printer 
utilities.

This allows the user to check on the computer screen whether 
or not the machine is able to print.
It provides information on error states such as paper misfeeds 
and shows the configuration of the machine (number of trays,  
etc.) by means of illustrations. Available paper sizes and paper 
remaining are also indicated.

This allows the administrator to check information on supplies 
and error states of the machine and other SHARP printers 
(compatible with the Printer Administration Utility) that are 
connected to the network. Settings can also be changed via the 
utility.

Note the following points before using the Printer Status 
Monitor.

When the first print job is executed after starting up the Printer 
Status Monitor, the machine's IP address is automatically set in 
the Printer Status Monitor.

Install and configure the software as explained in "INSTALLING 
THE PRINTER DRIVER (Standard installation)" in the software 
setup guide for network printer. (This is not necessary if the 
software has already been installed and configured.)

●

In order to use the Printer Status Monitor and Printer 
Administration Utility, the machine must be connected 
to a network.

●

To install the Printer Status Monitor and Printer 
Administration Utility, see the network expansion kit 
online manual (for setup).

●

To use the Printer Administration Utility in Windows 95, 
a system file must be updated. See the detailed 
information in the select packages window of the 
installer (see the software setup guide for network 
printer).