Read Sharp AR-MU2 Service Manual online
AR-D28/D27/MU2
ADJUSTMENTS
6 – 1
[6] ADJUSTMENTS
1. CHANGING THE PAPER SIZE
[Upper tray(Tray2)]
• A3 to A5R(11x7 to 5-1/2x8-1/2R) size plain paper can be set.
• Special paper can be set.
• Two maximum height lines are indicated: one for plain paper and one
for special paper.
[Middle/Lower tray(Tray3/4)]
• A4, B5 or 8-1/2" x 11" size plain paper can be set.
Use the following procedure to change the size as needed.
1) Pull out paper tray.
If paper remains in the tray, remove it.
2) Adjust the guide plates A and B in the tray to the length and width of
the paper.
The guide plates A and B are slidable. Adjust them to the paper size
to be loaded while squeezing their lock levers.
to be loaded while squeezing their lock levers.
3) Load paper into the tray.
Do not exceed red line when loading special paper to upper tray.
4) Gently push tray into the machine.
Push the tray firmly all the way into the machine.
5) Set the paper size.
Be sure to set the paper size and paper type referring to "2.Setting
the paper type and paper size".
If this is not done, paper misfeeds will occur.
2. SETTING THE PAPER TYPE AND
PAPER SIZE
Follow these steps to change the paper type setting if the paper type is
changed in either paper tray. For the paper types that can be used in
changed in either paper tray. For the paper types that can be used in
each tray.
1) Press the [CUSTOM SETTINGS] key.
The custom setting menu screen will appear.
2) Touch the [PAPER TRAY SETTINGS] key.
The paper tray selection screen will appear.
3) Touch the [TRAY SETTINGS] key.
4) Display the setting screen of the desired paper tray.
Touch the
key or
key to display the setting screen of the
desired paper tray.
Note: To automatically switch to a tray with the same size and type of
paper (if there is one) in the event that the paper tray runs out of
paper, display the last screen with the
paper, display the last screen with the
key and select [AUTO
TRAY SWITCHING].
5) Touch the [TYPE/SIZE] key.
6) Select the type of paper that was loaded in the tray.
Example: The paper type of tray 2 is selected
Touch the desired paper type to select it.
The paper size setting screen will appear.
The paper size setting screen will appear.
Note: Heavy paper, label sheets and transparency film cannot be used
in trays 1, 3, and 4. Envelopes can only be placed in tray 2.
PAPER TRAY
SETTINGS
TA
ORWARD
RINT
PRINTER
CONDITION
TRAY SETTINGS
PAPER TRAY SETTINGS
CUSTOM SETTINGS
1/4
PLAIN / A4
OK
PRINT
PAPER TRAY SETTINGS
TYPE / SIZE
CUSTOM SETTINGS
TRAY 1
FAX
I-FAX
COPY
DOC.
FILING
FIXED PAPER SIDE
DISABLE DUPLEX
DISABLE STAPLE
DISABLE PUNCH
TYPE / SIZE
TRAY 2
PER TRAY SETTINGS
PRINT
COPY
I-FAX
DOC.
FILING
FAX
PLAIN / A4
CANCEL
1/2
PLAIN
RECYCLED
PRE-PRINTED
PRE-PUNCHED
LETTER HEAD
COLOUR
HEAVY PAPER
ENVELOPE
LABELS
TRANSPARENCY
TRAY 2 TYPE/SIZE SETTING
SELECT THE PAPER TYPE.
CUSTOM SETTINGS
1/2
Click on the first or last page to see other AR-MU2 service manuals if exist.