AR-MU1 (serv.man10). Changing the application grease for each drive unit - Sharp Copying Equipment Technical Bulletin (repair manual)

ar-mu1 (serv.man10) technical bulletin
Model
AR-MU1 (serv.man10)
Pages
3 Few pages! See other manuals at the bottom of the first or last page.
Size
111.87 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / Changing the application grease for each drive unit
File
ar-mu1-sm10.pdf
Date

Read Sharp AR-MU1 (serv.man10) Technical Bulletin online

ARE373
Sharp Electronics (UK) Ltd., Technical Services Group
1.Model Name:
AR-D13/D14/MU1/DU4
2.Description:
The grease applied to the driving unit was changed so that the problems (paper jam and
others due to the clutch spinning or slipping) caused by the grease spatter are corrected
and the productivity are improved.
<How to apply Hanarl grease at the market>
1) Remove the gears in question from each driving unit.
2) Apply quick-drying grease evenly to the whole area of the teeth of each gear by using a
dispenser.
Note
1. Shake the bottle well before the grease is applied so that the grease components are
equally mixed.
2. Be sure not to apply the extra grease too much.
3. Do not mind if the grease is attached to other area of the gear besides the teeth area.
4. Do not apply the grease to any part besides the gear in question.
Especially, do not apply the grease to the clutch. If applied there, when the gear is
rotated, the extra grease is applied to the gear, which causes the problem.
3) Left the gear as it is for a while (about one minute), and install each gear to the original
position after the volatile component is quickly dried.
4) Other Notes.
1. Please do not mix the new grease with the previous type grease.
2. Please use the previous one if it has already applied to the gear.
3. It is possible to distinguish between the previous one and the new one according to
the color of the grease. (Previous one: White, New one: Red)
4. Hanarl is the quick-drying type grease, so please be sure to store with great care.
CHANGING THE APPLICATION GREASE
FOR EACH DRIVE UNIT
TECHNICAL BULLETIN
Date:
06 June 2002
Model: ARMU1
Ref.:
007
Colour: White
Page:
1 of 3
ARE373
Sharp Electronics (UK) Ltd., Technical Services Group
ARE373
Sharp Electronics (UK) Ltd., Technical Services Group
3.Action:
Running change from October 2001 production. (AR-D13/D14/MU1)
From 1st lot of December 2001 production. (AR-DU4)
Current parts
New parts
Ref.
No.
Model
name
Version P/G No.
Parts code
Parts code
Price
rank
Parts name
Effective
time
!"#$%&
'()"*$&
)+,-,#.
Note
UKOG-0238FCZZ
UKOG-0299FCZZ
BF
Hanarl FL955R
3
---
UKOG-0298FCZZ
BE
Brush-on
dispenser W
2001/10
Running
change
AR-D13
AR-D14
AR-MU1
UKOG-0158FCZZ
UKOG-0299FCZZ
BF
Hanarl FL955R
3
AR-DU4
ALL
---
UKOG-0298FCZZ
BE
Brush-on
dispenser W
2001/12
<Interchange>
1. Interchangeable.
4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
5. Interchangeable if replaced with same types of
related parts in use.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
6. Others.
Parts marked with "
" is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Page of 3
Display

Download Sharp AR-MU1 (serv.man10) Technical Bulletin

Here you can read online and download Sharp AR-MU1 (serv.man10) Technical Bulletin in PDF. AR-MU1 (serv.man10) technical bulletin will guide through the process and help you recover, restore, fix, disassemble and repair Sharp AR-MU1 (serv.man10) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.