AR-M700 (serv.man27). Simulation - Sharp Copying Equipment Service Manual (repair manual). Page 92

: Feb. 9 2004

AR-M550/M620/M700  SIMULATION  8 - 92

1) Enter the DTMF signal (1 - 9, 0, *, #) to be sent with 10-key.

2) Press [START] key.

The signal is sent in the send level set with the soft SW. 

When [CUSTOM SETTINGS] key is pressed during execution, the
operation is stopped.

1) Select YES/NO of data transfer (backup). 

2) Press [START] key.

This function is valid only when the AR-MM9 is installed.

Backup contents

The other contents are not backed up.

1) Select YES/NO of data transfer.

2) Press [START] key.

1) Enter the number corresponding to the information (item) to be

printed with 10-key.

2) Press [START] key.

66-18

Setting

Used to check the dial signal (DTMF) output in the FAX 
tone dial mode.  An output is sent at the send level set 
by the soft switch. Used to check the operation. (Only 
when FAX is installed)

FAX

Operation

Press [START] key.

Press [CUSTOM SETTINGS] key.

66-19

Data transfer

Used to back-up the HDD data into the Flash memory 
(optional FAX expansion memory: AR-MM9). (Only 
when FAX is installed)

FAX

Data

1

YES

Backup is executed.

2

NO

Backup is not executed.

• Address book data (FAX, Mail, Address)

• One-touch dial

• Item name

• FTP expansion

• Fine name

• Group expansion

• FAX receive select table

• Program

• IFAX receive YES/NO

• Use index

• Polling allow number

• Standard sender

• Memory box

• IFAX sender registration 

• Sender name

• FAX sender registration

• Soft SW

SIMULATION 66-18

DTMF SIGNAL OUTPUT.(SOFT SW.)  INPUT 0-9, *, #, AND PRESS

START.

1

SIMULATION 66-18

DTMF SIGNAL OUTPUT.(SOFT SW.)  EXECUTING···.

1

66-20

Data transfer

Used to read the back-up data by SIM 66-19 to the 
SRAM/HDD. (Only when FAX is installed)

FAX

Data

1

YES

Backup is executed.

2

NO

Backup is not executed.

66-21

Adjustment/Setup/Operation data output/Check 
(Display/Print)

Used to print information related to FAX (various 
registrations, communication management, file 
management, system error protocol). (Only when FAX 
is installed)

FAX

Data

1

REGISTERED

Various registration information

2

MANAGEMENT

Communication management 
information

3

FILE MANAGEMENT

File management information

4

SYSTEM ERROR

System error information

5

PROTOCOL

Protocol information

SIMULATION 66-19

ADDRESS DATA BACK UP. (WRITE TO FLASH ROM)

ARE YOU SURE?

1. YES

2. NO

SIMULATION 66-19

ADDRESS DATA BACK UP. (WRITE TO FLASH ROM) EXECUTING...

1

1

Press [START] key.

After completion of backup

SIMULATION 66-20

ADDRESS DATA BACK UP. (READ FROM FLASH ROM)

ARE YOU SURE?

1. YES

2. NO

SIMULATION 66-20

ADDRESS DATA BACK UP. (READ FROM FLASH ROM) EXECUTING...

1

1

Press [START] key.

After completion of read