AR-M700 (serv.man16). Details of each section - 2 Paper feed, paper transport - Sharp Copying Equipment Service Manual (repair manual). Page 13

Read Sharp AR-M700 (serv.man16) Service Manual online

AR-M550/M620/M700  DETAILS OF EACH SECTION  6 - 17
4) Remove the torque limiter.
a-5. Lift wire (Rear)
1) Remove the  paper feed tray units 1 and 2. (See “a. Paper feed
tray units 1 and 2” in “(Paper feed tray sections 1 and 2)”
2) Remove the E-ring, slide the winding pulley, and loosen the wire. 
3) Release the pawl, and remove the wire.
4) Remove the plastic E-ring.
5) Remove the wire.
Pass the nylon clamp.
Attach so that the red wire is on the outside.
Turn it clockwise to fit with the T-shape pin position and insert.
a-6. Lift wire (Front)
1) Remove the  paper feed tray 1/2 unit. (See “(Paper feed tray sec-
tions 1 and 2)” in “a. Paper feed tray units 1 and 2”)
2) Push down the tray and remove the screw, and remove the paper
feed tray 1/2 front cabinet. 
Page of 25
Display

Click on the first or last page to see other AR-M700 (serv.man16) service manuals if exist.