Read Sharp AR-M620 (serv.man16) Service Manual online
AR-M550/M620 DETAILS OF EACH SECTION 6 - 78
a. Process unit
1) Open the front door.
2) Open the process cover.
3) Open the left door.
4) Remove the MC charger unit.
5) Remove the blue screw.
6) Unfix the drum to remove the bearing.
7) Pull out the process unit by clasping the bolt head.
a-1. OPC drum
1) Disconnect the connectors.
2) Remove the blue screw to open the lower frame.
3) Gently remove the drum, guide and all.
4) Remove the guide.
NOTE:
(OPC layer break-off on both sides of the OPC drum)
The OPC layer of a certain area of the OPC drum may break off due to
rotational friction. The OPC layer break-off generated in the area
shown below will not affect print images. Therefore, the drum can be
used without replacement.
rotational friction. The OPC layer break-off generated in the area
shown below will not affect print images. Therefore, the drum can be
used without replacement.
12mm
14mm
Click on the first or last page to see other AR-M620 (serv.man16) service manuals if exist.