Read Sharp AR-M550 (serv.man30) FAQ online
REV. 1.00
33
TOTALDATASIZE: PC-FAX Control
PJL SET Command
Parameter
Meaning
TOTALDATASIZE
Show the data size that PJL header and
PJL tray are removed from the send data
in byte unit number of
PJL tray are removed from the send data
in byte unit number of
0…4,294,967,295.
Unused PJL Command for Dragon
In the Dragon printing system, the following PJL commands are not used.
This section only declares that the printer driver does not use the following
PJL commands. The description of this section does not have the effect to
firmware implementation.
OUTBIN: Output Destination Selection
“OUTTRAY” parameter is used in the Dragon printing system.
Dragon will ignore “OUTBIN” of the PJL SET/DEFAULT command.
RESOLUTION: Resolution Control
The printing resolution is only 600dpi for the Dragon printing system.
Dragon will ignore “RESOLUTION” of the PJL SET/DEFAULT command
and print any data in 600dpi.
LANG: Language Setting for Messages
In the Dragon system, language setting is controlled by printer engine. This
parameter of the PJL command is ignored in the Dragon printing system.
Click on the first or last page to see other AR-M550 (serv.man30) service manuals if exist.