AR-M550 (serv.man19). (12) Other - Sharp Copying Equipment Service Manual (repair manual). Page 7

AR-M550/M620  OTHER  12 - 7

The Web setting service mode provides the following functions:

• Font/Form Download

• Device Cloning

These functions are used to backup the user data and the key operator
program setting data, and to import backup data to another machine.
By using these functions, two or more machines can be set in the
same conditions in a short time.

• i-Fax Setup

This function is used to backup i-Fax receive data to the FTP server.

By using this function, receive data are backed up to the FTP server
when they cannot be printed by some reasons (paper empty, toner
empty, paper jam, etc.) and can be printed out after recovery of the
machine.

After completion of printing the backup data, they are deleted from the
FTP server. 

1) Boot the browser software.

2) Enter "xxx.xxx.xxx.xxx(IP address)/xxxx_xxxxx.html" and press

ENTER key.

3) Enter the user name and the password, and press OK button.

Note: The default user name and the default password are as follows:

User name: service

Password: shArp

The password can be optionally changed in the following procedures:

1) Enter "xxx.xxx.xxx.xxx(IP address)/password_setting.html" and

press ENTER key.

2) Enter a new password.

3) Enter the new password again in the check column.

4) Press SUBMIT button.

1) Press "xxx.xxx.xxx.xxx(IP address)/font_down.html" and press

ENTER key.

2) Enter the user name and the password, and press OK button.

3) Select "Download" menu.

4) Select Resourced type.

5) Select Storage Device.

6) Select Font file. 

7) Press "Download" button.

1) Press "xxx.xxx.xxx.xxx(IP address)/font_down.html" and press

ENTER key.

2) Enter the user name and the password, and press OK button. 

3) Select Management menu.

The list of downloaded fonts and the used percentage of the font area
in the memory device are displayed.

Press "Initialize" button and press Yes key, and the downloaded fonts
will be deleted.

1) Press "xxx.xxx.xxx.xxx(IP address)/device_cloning.html" and

press ENTER key.

2) Enter the user name and the password, and press OK button.

3) Select an item to be backed up. (Application / Key operator setting)

4) Press Execute key.

5) Press Save button. (File download mode)

6) Select the destination of save.

7) Press Save button.