Read Sharp AR-M550 (serv.man19) Service Manual online
AR-M550/M620 OTHER 12 - 5
J. Reset and set for suplly counters
2. Location and display of each counter data
Work item
Test Command
Reset item
Included Test Command
Setting the toner concentration control level
Sim25-2
Developer counter
Sim24-5
DV unit running time counter (sec)
Sim24-11
Reset the OPC drum counter
Sim24-7
OPC drum counter
—
Reset the Developer counter
Sim24-5
Developer counter
—
Reset the OPC drum running time counter (sec)
Sim24-11
OPC drum running time counter (sec)
—
Reset the DV running time counter (sec)
Sim24-11
DV running time counter (sec)
—
Simulation
Code
Operation content
Data
size
Data location
Conforming count mode
(SIM 26-5)
Count-up condition
Main Sub
MFP
control
PWB
FAX
Scanner
control
PWB
PCU
PWB
TOTAL
Mainte-
nance
DV
22
01
Each counter display (Total/ Mainte-
nance/ Developer/ SPF/ Staple/ Tray)
1:
nance/ Developer/ SPF/ Staple/ Tray)
1:
Total counter
●
■
2:
Drum cartridge counter
●
■
3:
Toner cartridge counter
●
■
4:
Deve cartridge counter
●
■
5:
Maintenance counter
●
■
6:
Total output page number counter
●
■
7:
Copy counter
●
■
8:
Printer counter
●
■
9:
FAX output counter
●
■
10: I-FAX output counter
●
■
11: Document filing output counter
●
■
12: Right side output counter
●
■
Count is made when the main unit paper exit is started. (When POP2
is ON)
is ON)
13: Other print counter
●
■
Refer to the “Count Specifications.”
02
Jam/ Trouble counter display
1:
1:
Paper jam
●
—
—
—
Count is made when an event occurs. (A jam by closing the door dur-
ing paper transport is not counted.)
ing paper transport is not counted.)
2:
SPF jam
●
—
—
—
Count is made when an event occurs. (A jam by closing the door dur-
ing paper transport is not counted.)
ing paper transport is not counted.)
3:
Trouble
●
—
—
—
Count is made when an event occurs. (Follows the trouble count
method of SIM 26-35.)
method of SIM 26-35.)
08
Document, staple counter display
1:
1:
SPF document feed page number
●
—
—
—
One count is made every time when SPF document is paper feed.
2:
Scan number
●
—
—
—
One count is made every time when scan is completed.
3:
Staple number
●
—
—
—
One count for every stapling (Stapling at two positions is counted as
2.)
2.)
4:
Punch number
●
—
—
—
One count for every punching
5:
SPF finish stamp number
●
—
—
—
One count when stamp is started.
6:
Saddle staple number
●
One count for every saddle stapling
7:
Inserter number
●
One count for every paper pick-up
09
Paper feed counter display
1:
1:
Paper feed tray 1 (Tandem Left)
●
—
—
—
One count for every paper pick-up
2:
Paper feed tray 2 (Tandem Right)
●
—
—
—
One count for every paper pick-up
3:
Paper feed tray 3
●
—
—
—
One count for every paper pick-up
4:
Paper feed tray 4
●
—
—
—
One count for every paper pick-up
5:
MFT (Manual paper feed tray)
●
—
—
—
One count for every paper pick-up
6:
ADU
●
—
—
—
One count for every paper transport start from ADU.
7:
LCC
●
One count for every paper pick-up
11
FAX send/receive counter display
1:
1:
FAX send (Send counter)
32bit
●
—
—
—
Accumulated page number of send
• Except for the serial transmit operation, one reservation is counted
• Except for the serial transmit operation, one reservation is counted
as one communication.
• For the serial transmit operation, count is made for each communi-
cation individually.
• Recall is not included.
• Saved in the FAX-SRAM.
• Saved in the FAX-SRAM.
2:
FAX receive (Receive counter)
32bit
●
—
—
—
Accumulated number
• Count is made regardless of normal or abnormal completion.
• Saved in the 32bit counter and the FAX-SRAM.
• Count is made regardless of normal or abnormal completion.
• Saved in the 32bit counter and the FAX-SRAM.
3:
FAX output (FAX print counter)
32bit
●
■
The accumulated page number of FAX receive print
Count by size and count in recovery are the same as the copier spec-
ifications.
• Counted by the print system.
Refer to the “Count Specifications.”
Count by size and count in recovery are the same as the copier spec-
ifications.
• Counted by the print system.
Refer to the “Count Specifications.”
4:
FAX send images (Send page
number)
number)
32bit
●
—
—
—
Accumulated page number of send
• In the serial transmit operation, each communication is counted as
• In the serial transmit operation, each communication is counted as
one individually.
• Saved in the 32bit counter and the FAX-SRAM.
5:
Send time (Send time)
48bit
●
—
—
—
hhhhhhhh:mm:ss
Saved in the FAX-SRAM.
Saved in the FAX-SRAM.
6:
Receive time (Receive time)
48bit
●
—
—
—
hhhhhhhh:mm:ss
Saved in the FAX-SRAM.
Saved in the FAX-SRAM.
Click on the first or last page to see other AR-M550 (serv.man19) service manuals if exist.