Read Sharp AR-M550 (serv.man13) Service Manual online
AR-M550/M620 DETAILS OF EACH SECTION 6 - 148
a-5. Controller cooling fan motor
1) Remove the driver PWB unit. (See “a-3. Driver PWB” in this sec-
tion)
2) Disconnect the connector and remove the harness clamp. Remove
the controller cooling fan motor unit.
3) Remove the controller cooling fan motor.
a-6. HDD cooling fan motor
1) Remove the rear cabinet and the rear cabinet upper. (See “a-3.
Driver PWB” in this section)
2) Disconnect the connector, and remove the harness clamp.
Remove the HDD cooling fan motor unit.
3) Disconnect the connector, and remove the HDD cooling fan motor.
a-7. HDD
1) Remove the cooling fan motor unit. (See “a-5. Controller cooling
fan motor” in this section)
2) Disconnect the connector, and remove the HDD unit.
3) Remove the HDD slide plate, and remove the HDD mounting plate
from the HDD.
a-8. Soft NIC PWB
1) Pull out the multi manual paper feed tray unit, and remove the
manual paper feed cover F.
2) While pressing the lower part, remove the right cabinet middle.
Click on the first or last page to see other AR-M550 (serv.man13) service manuals if exist.