Read Sharp AR-M351U / AR-M451U (serv.man46) Technical Bulletin online
Sharp Electronics (UK) Ltd., Technical Services Group
No.
Subject
Description
14
Printer
A barcode is not printed with predefined height when the height is specified as 12
points or less.
points or less.
15
Printer
The “ESC (s20.00h)” command (a font-pitch change command) does not function.
16
Printer
PS jobs that have the “CTRL-D” command are not printed properly.
17
Printer
When printing “1 page 1 job” data with IPX/SPX protocol, the printing takes longer
than that with IP protocol.
than that with IP protocol.
18
Printer
LPR printing may stop temporarily.
19
Printer
Data may not be printed in Netware 6.5NDPS if the data has a lot of nulls at its
beginning.
beginning.
20
Printer
Printing may stop in the middle of the process when printing specific PDF data
using the PS driver.
using the PS driver.
21
Printer
A machine may reboot when printing specific PS or PDF data.
22
Printer
A machine may be hung up in the following condition:
When the PCL data is printed after the PS data. Then Flash is initialized from a web
page.
When the PCL data is printed after the PS data. Then Flash is initialized from a web
page.
23
Printer
Printing data may get lost in the middle of the process when using the PS form.
24
Printer
A4 Wide printing area becomes reduced in size when printing data in the PCL5e
mode.
mode.
25
Printer
Printing may be misaligned when executed with DOS for business use.
26
Printer
AR Mincho U fonts get garbled when printed.
27
Printer
Data may not be printed properly when output with Quark Xpress Passport 7.0.
Click on the first or last page to see other AR-M351U / AR-M451U (serv.man46) service manuals if exist.