Read Sharp AR-M35 / AR-M450 (serv.man8) Service Manual online
AR-350/450 BASIC PAPER TRANSPORT PATH AND PAPER EXIT 3-18
2) When the horizontal registration sensor (LED1 through 4, PT1
through) suited to the paper size signal from the host machine
detects the rear edge of the sheet, the horizontal registration motor
(FPSM) causes a farther move to a specific position, and stops the
punch slide unit.
punch slide unit.
3) When the trailing edge sensor (LED5, PT5) detects the trailing edge
of the sheet, the drive of the feed motor (FFM) is stopped, thereby
stopping the sheet. Then, the punch motor (FPNM) is driven to
stopping the sheet. Then, the punch motor (FPNM) is driven to
punch holes in the sheet.
4) When the punching operation ends, the feed motor (FFM) of the
fisher unit is driven and, at the same time, the horizontal registration
motor (FPSM) is rotated in reverse to return the punch slide unit to its
home position.
5) For each sheet that arrives in succession, the punch slide unit is
returned to its home position, and is caused to repeat steps 1
through 4 .
d. Stapling position quick reference guide for duplex output
The orientation of the copy paper, original, scanned original data, and
binding position selection are all interrelated.
binding position selection are all interrelated.
The table below shows these relationships.
e. Relation between print image and saddle stitch
The orientation of the copy paper, original, scanned original data, and
binding position selection are all interrelated.
The table below shows these relationships.
Note: Transparency film, labels , envelopes and postcards cannot be
stapled.
Note: If mixed paper sizes are selected for stapling jobs, stapling will be
automatically canceled.
Horizontal registration sensor (LED1, PT1);
used to detect the edge of sheets of A3, A4,
LTR, 279
used to detect the edge of sheets of A3, A4,
LTR, 279
×432 (11"×17").
Horizontal registration sensor 2 (LED2, PT2);
used to detect the edge of sheets of B4, B5,
LTRR, LGL.
used to detect the edge of sheets of B4, B5,
LTRR, LGL.
Horizontal registration sensor 3 (LED3, PT3);
used to detect the edge of sheets of A4R.
used to detect the edge of sheets of A4R.
Horizontal registration sensor 4 (LED4, PT4);
used to detect the edge of sheets of B5R.
used to detect the edge of sheets of B5R.
Punch
: CW rotation
: CCW rotation
Feed motor (FFM)
Trailing edge sensor
(LED5, PT5)
(LED5, PT5)
Horizontal registration
sensor (LED1~4, PT1~4)
sensor (LED1~4, PT1~4)
Punch home position
sensor
sensor
Horizontal registration home
position sensor (PSHPS)
position sensor (PSHPS)
Horizontal registration
motor (FPSM)
motor (FPSM)
Punch motor (FPNM)
Orientation of original or original data
Output result
Page 1
Page 2
Page 1 & Page 2
Duple xed
One-position stapling
Two-position stapling
One-position stapling
Two-position stapling
One-position stapling
Two-position stapling
Two-position stapling
One-position stapling
One-position stapling
One-position stapling
Left binding with two-position
stapling cannot be made.
stapling cannot be made.
Right binding with two-
position stapling cannot be
made.
position stapling cannot be
made.
Top binding with two-position
stapling cannot be made.
stapling cannot be made.
Two-position stapling along
the shorter edge cannot be
made.
the shorter edge cannot be
made.
Two-position stapling along
the shorter edge cannot be
made.
the shorter edge cannot be
made.
Two-position stapling along
the shorter edge cannot be
made.
the shorter edge cannot be
made.
Right binding
Right binding
T
o
p binding
T
o
p binding
Left binding
Left binding
P
o
rtrait orientation printing
Landscape orientation printing
Same as abo ve
Orientation of original or original data
Output result
Page 1
Page 3
Page 2
Page 4
Page 1 & Page 2
Duple xed
Page 3 & Page 4
Duple xed
Right binding
Left binding
P
o
rtrait orientation printing
Landscape orientation printing
Page 1
Page 3
Page 2
Page 4
Page 1 & Page 2
Duple xed
Page 3 & Page 4
Duple xed
+ !"#$%
Click on the first or last page to see other AR-M35 / AR-M450 (serv.man8) service manuals if exist.