Read Sharp AR-M35 / AR-M450 (serv.man8) Service Manual online
AR-350/450 BASIC PAPER TRANSPORT PATH AND PAPER EXIT 3-5
D. Paper exit after stapling
1) The joggers F/R are moved to the paper exit position.
2) The stopper solenoid is turned off.
3) The pressure release solenoid is turned on to shift the pusher to the
paper exit position, and the paper bundle is discharged to the tray 2
paper exit section.
4) The pressure release solenoid is turned off and the pusher is
returned to the home position.
E. Stapling position quick reference guide for duplex
output
The orientation of the copy paper, original, scanned original data, and
binding position selection are all interrelated. The
binding position selection are all interrelated. The
table below shows these relationships.
Note: Stapling can only be done when the offset tray has been selected.
Note: If mixed paper sizes are selected for stapling jobs, stapling will be
automatically canceled.
Note: Transparency film, labels , envelopes and postcards cannot be
stapled.
5. Finishing operation (AR-FN7)
A. Feed/Drive System
(1) Outline
The machine performs the following in response to the commands
coming from its host machine on the sheets arriving from the host
machine for delivery: simple stacking, job offset, and stapling or folding
machine for delivery: simple stacking, job offset, and stapling or folding
(in two).
If a punch unit (option) is installed, the sheets are pouched and delivered
to the delivery tray.
to the delivery tray.
Sheets may be delivered in either of five ways (including one for the
puncher unit):
a. Normal Delivery
<1>Simple Stacking
The machine pulls in the sheet once to the processing tray and then
delivers it to the delivery tray.
Pusher
Jogger R
Jogger F
1
1
4
3
3
Stopper
2
Pressure release roller
Paper bundle exit
Orientation of original or original data
Output result
Page 1
Page 2
Page 1 & Page 2
Duplexed
P
o
rt
ra
it or
ientation pr
inting
Left binding
T
op binding
Right binding
Left binding
T
o
p binding
Right binding
One-position stapling Two-position stapling
One-position stapling Two-position stapling
One-position stapling
Landscape or
ientation pr
inting
Two-position stapling
One-position stapling
One-position stapling
One-position stapling
Two-position
stapling with left
binding cannot be
made.
stapling with left
binding cannot be
made.
Two-position
stapling with right
binding cannot be
made.
stapling with right
binding cannot be
made.
Two-position
stapling with top
binding cannot be
made.
stapling with top
binding cannot be
made.
Punching
Normal
delivery
delivery
Delivery
method
method
Middle 2-point stapling
Job offset
Simple stacking
Stapling
Front 1-point stapling
Rear 1-point stapling
Middle 2-point stapling
Stitching
Saddle delivery
Tray
Paper
( !"#$%
Click on the first or last page to see other AR-M35 / AR-M450 (serv.man8) service manuals if exist.