AR-M35, AR-M450 (serv.man77). Updated ROM version - Sharp Copying Equipment Technical Bulletin (repair manual). Page 6

ARE370

Sharp Electronics (UK) Ltd., Technical Services Group

(2) The following functions will be overridden in the EXTRA PRINT MODE.
When the NJR, which functions to inform the user of job completion, is on, job completion
information is not delivered in the EXTRA PRINT MODE.

(3) The EXTRA PRINT MODE cannot be used with any of following functions. (Setting made

via printer driver)
Sample print, print hold, confidential print, pamphlet, staple, punch, cover mode,
transparency page insertion

(4) In any of the following cases, the EXTRA PRINT MODE will go OFF. (Setting made via

printer driver)
1) Changing the paper type
2) Switching the printing mode between duplex and simplex
3) Changing the binding orientation or page orientation in duplex mode
4) Changing the exit tray

5) Changing the setting of any of the following functions; toner save mode, smoothing, 1-bit

half tone mode, binding position, margin shift

3.Disabling of bypass printing.
*This function is used to disable the engine to skip the job suspended during printing.

*“Disabling of bypass printing” is valid in any of the following situations.
(1) Paper out
(2) Paper full detection
(3) Staple compiler full
(4) Staples out
(5) Disabling of paper feeding from paper drawer
(6) Punch scrap collecting container full

*This function is used to disable bypass printing on the engine available for job reservation,

which allows the next available job to skip the current job temporarily being stopped due
to paper out or other reasons.

*Operation via MFP operation panel
(1) Press [CUSTOM SETTINGS] to access the custom settings screen.
(2) Press [KEY OPERATOR PROGRAMS] to access the key operator programs menu
screen.
(3) Press [OPERATION SETTINGS] to access the operation settings menu screen.
(4) Check the [DISABLING OF BYPASS PRINTING] check box.

*Operation via printer engine
(1) Press [Menu], select [KEY OPERATOR PROGRAMS], and then press [OK].
(2) Select [OPERATION PANEL SETTINGS], and then press [OK].
(3) Press the [UP]/[DOWN] key to select [DISABLING OF BYPASS PRINTING], and then
press [OK].
(4) Press the [UP]/[DOWN] key to select ON, and then press [OK].

4. Changed the INITIAL RESOLUTION SETTING screen < Operation settings < the Image

send settings in Key operator programs

*Added a numeric resolution level displayed next to the resolution key such as

[STANDARD], [FINE] and so forth in the initial resolution setting screen < Operation
settings < Image send settings.
*In the case of “fax only”, the current screen remains as it is.

5. Changed the INITIAL FILE FORMAT SETTING screen < Scan to E-mail initial status

settings < Image send settings in Key operator programs (For network scan)
*Added the [ONE PAGE PER FILE] check box into the INITIAL FILE FORMAT

SETTING screen > Image send initial status settings.

6. Beep sound setting

*In the current model, various beep sound settings are installed randomly; therefore
the user cannot easily find the setting screen he/she wants.  As a solution to this