AR-M35, AR-M450 (serv.man52). Manual describing latest firmware updates - Sharp Copying Equipment Driver / Update. Page 2

When Rotated output is turned on, you can have the paper output orientation (A4-size paper only) of each set of
copies alternate between horizontal and vertical. This function is used to sort output when neither the Finisher
peripheral nor the Saddle stitch finisher peripheral are installed.
* To use this function, A4-size paper must be loaded both horizontally and vertically in the paper trays. This

function works when paper is output to the upper paper output area of the laser printer, the exit tray of the
Duplex module peripheral, or the top tray of the Mail-bin stacker.

The function does not work in the following cases:
• When paper is output to the Finisher peripheral or the Saddle stitch finisher.
• Printing in Group mode.
• When a letter-size original is printed on A4-size paper using the "A4/LT auto select {A4/letter size auto change}"

key operator program (page 7-11).

• When "Transparency Inserts" or "Different Paper" is selected in the printer driver.
• When the "Paper Source" drop down in the "Paper Selection" is set to any selection other than "Auto Select" in

the printer driver.

• When the printing paper size for a stored job or a job in progress has been overridden and changed to A4 size.

• When interrupt copying is performed, Rotated output does not take place to distinguish the output of regular copying from

interrupt copying. Also, Rotated output cannot be used to sort output by job.