AR-M35, AR-M450 (serv.man33). ARP M350 450-Operation Manual (Printer) - Sharp Copying Equipment User Guide / Operation Manual

LASER PRINTER

Model

Be sure to become thoroughly familiar with this manual to gain 
the maximum benefit from the product.

Before installing this product, be sure to read the installation 
requirements and cautions sections of the "Operation manual for 
printer operation and general information".

Be sure to keep all operation manuals handy for reference 
including this manual, the "Operation manual for printer 
operation and general information" and operation manuals for 
any optional equipment which has been installed.

In some areas, the "POWER" switch positions are marked "I" and "   " on the copier 
instead of "ON" and "OFF".
The symbol "   " denotes the copier is not completely de-energized but in a stand-by 
condition at this "POWER" switch position.
If your copier is so marked, please read "I" for "ON" and "     " for "OFF".

The CE mark logo label is affixed on an equipment in case that the directives described in the above 
sentence are applicable to the product. (This sentence is not applicable in any country where the 
above directives are not required.)

Note:
When this equipment is equipped with a multi-function controller board which allows the 
equipment to include copier, facsimile, and network scanning capabilities, the following 
text will be applied.

Warning:
This is a Class A product. In a domestic environment this product may cause radio 
interference in which case the user may be required to take adequate measures.

This manual applies to the following models.

(As of April 2001)

Model name

Product configuration

AR-P350

35 page/minute printer

AR-P450

45 page/minute printer

AR-M350

35 page/minute printer including a multi-function controller board*

1

AR-M450

45 page/minute printer including a multi-function controller board*

1

Although peripheral devices are basically optional, some devices may be provided as standard components depending
on the model.
*1 A multi-function controller board is required to extend the function of the product to include copier, facsimile and

network scanning features.

Several operation manuals are provided for this product. Read all manuals that apply to the configuration of the model
you purchased .

●

Operation manual (Read this document before installing the product.)

●

Operation manual (for printer operation and general information)
Describes the basic printer operation, operation of optional devices and basic procedures for loading paper,
misfeed removal, and user maintenance.

●

Operation manual (for copier)
This manual describes all copier functions for models equipped (either as standard or with optional devices) to
include copier functions. The manual is included with models configured with a multi-function controller board and
a scanner module.

●

Operation manual (for network scanner)
This manual describes all network scanning functions for models equipped with an optional network scanner
expansion kit. This manual is supplied with models equipped with a multi-function controller board.

●

Operation manual (for facsimile)
This manual describes all facsimile functions for models equipped with an optional facsimile expansion kit.
The manual is included with the kit.

NOTE
The facsimile expansion kit may not be available in some regions.

This operation manual is described based on the American spelling standard.

1. License.   The application, demonstration, system and other software accompanying this License, whether on
disk, in read only memory, or on any other media (the “Software”) and related documentation are licensed to you by
SHARP.  You own the disk on which the Software is recorded but SHARP and/or SHARP’S Licensors retain title to the
Software and related documentation. This License allows you to use the Software on one or more computers connected
to a single printer and make one copy of the Software in machine-readable form for backup purposes only.  You must
reproduce on such copy the SHARP copyright notice, the copyright notice of SHARP’S Licensors and any other
proprietary legends of SHARP and/or its Licensors that were on the original copy of the Software. You may also transfer
all your license rights in the software, the backup copy of the Software, the related documentation and a copy of this
License to another party, provided the other party reads and agrees to the terms and conditions of this License.

2. Restrictions.   The Software contains copyrighted material, trade secrets and other proprietary material which is
owned by SHARP and/or its Licensors and in order to protect them you may not decompile, reverse engineer, disassemble
or otherwise reduce the Software to a human-perceivable form. You may not modify, network, rent, lease, loan, distribute
or create derivative works based upon the Software in whole or in part.  You may not electronically transmit the
Software from one computer to another or over a network.

3. Termination.   This license is effective until terminated.  You may terminate this License at any time by destroying
the Software and related documentation and all copies thereof.  This License will terminate immediately without notice
from SHARP and/or SHARP’S Licensors if you fail to comply with any provision of this License.  Upon termination you
must destroy the Software and related documentation and all copies thereof.

4. Export Law Assurances.   You agree and certify that neither the Software nor any other technical data received
from SHARP, nor the direct product thereof, will be exported outside the United States except as authorized and as
permitted by the laws and regulations of the United States. If the Software has been rightfully obtained by you outside
of the United States, you agree that you will not re-export the Software nor any other technical data received from
SHARP, nor the direct product thereof, except as permitted by the laws and regulations of the United states and the
laws and the regulation of the jurisdiction in which you obtained the Software.

5. Government End Users.   If you are acquiring the Software on behalf of any unit or agency of the United States
Government, the following provisions apply.  The Government agrees:
(i) if the Software is supplied to the Department of Defense (DoD), the Software is classified as “Commercial Computer

Software” and the Government is acquiring only “restricted rights” in the Software and its documentation as that
term is defined in Clause 252.227-7013 (c)(1) of the DFARS; and

(ii) if the Software is supplied to any unit or agency of the United States Government other than DoD, the Government's

rights in the Software and its documentation will be as defined in Clause 52.227-19 (c)(2) of the FAR or, in the case
of NASA, in Clause 18-52.227-86 (d) of the NASA Supplement to the FAR.

6. Limited Warranty on Media.   SHARP warrants the disks on which the Software is recorded to be free from
defects in materials and workmanship under normal use for a period of ninety (90) days from the date of purchase as
evidenced by a copy of the receipt.  The entire liability of SHARP and/or its Licensors and your exclusive remedy will
be replacement of the disk which fails to meet the limited warranty provided by this Clause 6.  A disk will be replaced
when it is returned to SHARP or a SHARP authorized representative with a copy of the receipt.  SHARP will have no
responsibility to replace a disk damaged by accident, abuse or misapplication.