AR-M300 (serv.man11). ARM300N U Operation Manual (Printer) - Sharp Copying Equipment User Guide / Operation Manual. Page 3

1. The machine should be installed near an accessible

power outlet for easy connection.

2. Be sure to connect the power cord only to a power

outlet that meets the specified voltage and current
requirements. Also make certain the outlet is
properly grounded.

●

For the power supply requirements, see the name
plate of the main unit.

3. Do not install your machine in areas that are:

●

damp, humid, or very dusty

●

exposed to direct sunlight

●

poorly ventilated

●

subject to extreme temperature or humidity
changes, e.g., near an air conditioner or heater.

4. Be sure to allow the required space around the

machine for servicing and proper ventilation.

Improper installation may damage this product. Please note the following during initial installation and whenever the
machine is moved.

31-1/2"

(80cm)

23-5/8"

(60cm)

23-5/8" (60cm)

11-13/16" (30cm)

A small amount of ozone is produced within the printer during operation. The emission
level is insufficient to cause any health hazard.

NOTE:
The present recommended long term exposure limit for ozone is 0.1 ppm (0.2 mg/m

3

)

calculated as an 8 hr. time-weighted average concentration.
However, since the small amount that is emitted may have an objectionable odor, it is
advisable to place the copier in a ventilated area.