AR-M256 (serv.man18). Operation Manual (Copier) - Sharp Copying Equipment User Guide / Operation Manual. Page 18

Follow these guidelines when using special papers.

Do not use the following envelopes (Misfeeds will 
occur.).
• Envelopes with metal tabs, clasps, strings, holes, or 

windows.

• Envelopes with rough fibres, carbon paper, or glossy 

surfaces.

• Envelopes with two or more flaps.
• Envelopes with tape, film, or paper attached to the 

flap.

• Envelopes with a fold in the flap.
• Envelopes with glue on the flap to be moistened for 

sealing.

• Envelopes with labels or stamps.
• Envelopes that are slightly inflated with air.
• Envelopes with glue protruding from the seal area.
• Envelopes with part of the seal area peeled off.

Letterhead paper is paper with information pre-printed 
at the top such as a company name and address.

• Use SHARP recommended transparency film and 

label sheets. Using other than SHARP 
recommended paper may result in misfeeds or 
smudges on the output. If other than SHARP 
recommended media must be used, feed each 
sheet one at a time using the bypass tray (Do not 
attempt continuous copying or printing.).

• There are many varieties of special paper available 

on the market, and some cannot be used with this 
machine. Before using special paper, contact your 
authorised service representative.

• Before using other than SHARP recommended 

paper, make a test copy to see if the paper is 
suitable.

SHARP

ar_m318_uk_cpy.book  16 ページ  ２００７年１月１５日　月曜日　午前１１時３６分