Read Sharp AR-M165-207 (serv.man25) User Guide / Operation Manual online
91
TROUBLESHOOTING
7
The transmitted image is
distorted.
distorted.
Were line conditions poor
due to thunder or another
reason?
due to thunder or another
reason?
Try the transmission
again.
again.
–
Were the resolution and
exposure settings
suitable?
exposure settings
suitable?
Check the resolution and
exposure settings.
exposure settings.
"SELECTING
RESOLUTION AND
EXPOSURE SETTINGS"
on page 15
RESOLUTION AND
EXPOSURE SETTINGS"
on page 15
White or black lines
appear in the transmitted
image.
appear in the transmitted
image.
Is the document glass or
the scanning glass for the
SPF (the long, narrow
glass) dirty?
the scanning glass for the
SPF (the long, narrow
glass) dirty?
Clean the document glass
or the scanning glass for
the SPF.
or the scanning glass for
the SPF.
"CLEANING THE
MACHINE" in the
"Operation manual (for
general information and
copier)"
MACHINE" in the
"Operation manual (for
general information and
copier)"
Transmission does not
take place at the specified
time.
take place at the specified
time.
Is the machine's clock set
to the correct time?
to the correct time?
Set the clock to the correct
time.
time.
"DATE & TIME SET" on
page 99
page 99
Printing does not take
place after reception.
place after reception.
Does an error message
appear regarding adding
paper, replenishing toner,
or a misfeed? (This means
that printing is not
possible.)
appear regarding adding
paper, replenishing toner,
or a misfeed? (This means
that printing is not
possible.)
Restore printing capability
as instructed by the
display message. Printing
will begin.
as instructed by the
display message. Printing
will begin.
"WHEN AN ALARM
SOUNDS AND A
WARNING MESSAGE IS
DISPLAYED" on page 88
SOUNDS AND A
WARNING MESSAGE IS
DISPLAYED" on page 88
A received fax prints out
blank.
blank.
Was the wrong side of the
original scanned in the
transmitting machine?
original scanned in the
transmitting machine?
Check with the operator of
the transmitting machine.
the transmitting machine.
–
The received image is
faint.
faint.
Is the original faint?
Ask the other party to
re-send the fax using a
suitable exposure setting.
re-send the fax using a
suitable exposure setting.
–
The received image is
distorted.
distorted.
Were line conditions poor
due to thunder or another
reason?
due to thunder or another
reason?
Ask the other party to
send the fax again.
send the fax again.
–
T
e
le
phon
e
A dial tone is not heard
through the speaker.
through the speaker.
Is the volume set to "low"?
Set the speaker volume to
"middle" or "high".
"middle" or "high".
"SPEAKER VOLUME" on
page 97
page 97
The machine does not
ring.
ring.
Has the ringer volume
been turned off?
been turned off?
Set the ringer volume to
"low", "middle", or "high".
"low", "middle", or "high".
"SPEAKER VOLUME" on
page 97
page 97
Dialling is not possible.
Is the telephone line
properly connected?
properly connected?
Check the connections.
"Line connection" on page
4
4
If an extension phone is
connected to the machine,
has the "EXTENSION TEL"
program been enabled?
connected to the machine,
has the "EXTENSION TEL"
program been enabled?
Enable this program.
"EXTENSION TEL" on
page 97
page 97
Problem
Check
Solution
Page
Pegasus-E_Fax_Ex.book 91 ページ ２００４年１０月１８日 月曜日 午後８時４１分
Click on the first or last page to see other AR-M165-207 (serv.man25) service manuals if exist.