Read Sharp AR-M165-207 (serv.man25) User Guide / Operation Manual online
7
1
BEFORE USING THE FAX
FUNCTION
FUNCTION
This chapter contains basic information about using the fax function of the machine. Please read this chapter before
using the fax function.
using the fax function.
POINTS TO CHECK AND PROGRAM
AFTER INSTALLATION
AFTER INSTALLATION
After installing the machine and before using it as a fax machine, check the following points and program the
required information.
required information.
Set the date and time
The machine has an internal clock. It is important to set the correct date and time because they are used for such
features as Timer Transmission (page 34).
The date and time are set in the key operator programs. (Page 99)
The date and time appear in the display. Make sure the correct date and time appear. If the date and time are wrong,
please correct them.
features as Timer Transmission (page 34).
The date and time are set in the key operator programs. (Page 99)
The date and time appear in the display. Make sure the correct date and time appear. If the date and time are wrong,
please correct them.
Program the sender's name and sender's number
The name and fax number of the user of the machine is programmed in "OWN PASSCODE SET" (page 96) in the
key operator programs. (Only one name and number can be programmed.)
The programmed name and number are printed at the top of each transmitted fax page. The sender's number is also
used as an identification number when you use the Polling function to request transmission from another fax
machine (see "USING THE POLLING FUNCTION" on page 37).
key operator programs. (Only one name and number can be programmed.)
The programmed name and number are printed at the top of each transmitted fax page. The sender's number is also
used as an identification number when you use the Polling function to request transmission from another fax
machine (see "USING THE POLLING FUNCTION" on page 37).
Paper sizes that can be used for fax mode
The machine can use A3, B4, A4, A4R, B5, B5R, A5, 11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8-1/2" x 11"R, and 5-1/2"
x 8-1/2"* size paper; however, 11" x 17", 8-1/2" x 14" and 5-1/2" x 8-1/2" size paper cannot be used in fax mode.
(Among INCH sizes, only 8-1/2" x 11" and 8-1/2" x 11"R can be used.) (If your machine uses inch-based paper
sizes, A3, B4, B5, B5R, and A5 size paper cannot be used in fax mode. (Among AB sizes, only A4 and A4R can be
used.)) For this reason, if only paper sizes that can be used in other modes but not in fax mode are loaded in the
machine, received faxes cannot be printed. (For other points regarding fax reception, see "RECEIVING FAXES"
page 28.)
x 8-1/2"* size paper; however, 11" x 17", 8-1/2" x 14" and 5-1/2" x 8-1/2" size paper cannot be used in fax mode.
(Among INCH sizes, only 8-1/2" x 11" and 8-1/2" x 11"R can be used.) (If your machine uses inch-based paper
sizes, A3, B4, B5, B5R, and A5 size paper cannot be used in fax mode. (Among AB sizes, only A4 and A4R can be
used.)) For this reason, if only paper sizes that can be used in other modes but not in fax mode are loaded in the
machine, received faxes cannot be printed. (For other points regarding fax reception, see "RECEIVING FAXES"
page 28.)
* A5 (5-1/2" x 8-1/2") size paper can only be loaded in tray 1, regardless of the mode. A5 (5-1/2" x 8-1/2") paper cannot be
loaded in tray 2 or in the optional 250-sheet paper feed unit or 2 x 250-sheet paper feed unit.
You can check your programmed name and number by printing out the "Key Operator List" in the key operator
programs. (See "LIST PRINT" on page 95.)
programs. (See "LIST PRINT" on page 95.)
For the procedures for loading paper in the trays, see the "Operation manual (for general information and
copier)".
copier)".
Note
Note
Pegasus-E_Fax_Ex.book 7 ページ ２００４年１０月１８日 月曜日 午後８時４１分
Click on the first or last page to see other AR-M165-207 (serv.man25) service manuals if exist.