AR-M165-207 (serv.man19). General Information and Copier Operation Manual - Sharp Copying Equipment User Guide / Operation Manual

ar-m165-207 (serv.man19) user guide / operation manual
Model
AR-M165-207 (serv.man19)
Pages
108
Size
3.14 MB
Type
PDF
Document
User Guide / Operation Manual
Brand
Device
Copying Equipment / General Information and Copier Operation Manual
File
ar-m165-207-sm19.pdf
Date

Read Sharp AR-M165-207 (serv.man19) User Guide / Operation Manual online

Be sure to become thoroughly familiar with this manual to 
gain the maximum benefit from the product.
Before installing this product, be sure to read the 
cautions and installation requirements sections.
Be sure to keep all operation manuals handy for reference 
including this manual, the "Operation manual (for general 
information and copier)" and operation manuals for any 
optional equipment which has been installed.
MODEL
DIGITAL MULTIFUNCTIONAL 
SYSTEM
OPERATION MANUAL
(for general information and copier)
PART 1: GENERAL INFORMATION
• BEFORE USING THE PRODUCT
• TROUBLESHOOTING 
   AND MAINTENANCE
• PERIPHERAL DEVICES 
   AND SUPPLIES
PART 2: COPIER OPERATION
• COPY FUNCTIONS
• CONVENIENT COPY 
   FUNCTIONS
• APPENDIX
• KEY OPERATOR’S GUIDE
12
24
40
45
64
73
75
Page
AR-M165
AR-M207
With the RSPF installed
AR-M165
AR-M207
Warranty
While every effort has been made to make this document as accurate and helpful as possible, SHARP Corporation 
makes no warranty of any kind with regard to its content. All information included herein is subject to change without 
notice. SHARP is not responsible for any loss or damages, direct or indirect, arising from or related to the use of this 
operation manual. 
© Copyright SHARP Corporation 2004. All rights reserved. Reproduction, adaptation or translation without prior 
written permission is prohibited, except as allowed under copyright laws.
Warning:
This is a Class A product. In a domestic environment this product may cause radio interference in which case 
the user may be required to take adequate measures.
In some areas, the "POWER" switch positions are marked "I" and "   " on the copier 
instead of "ON" and "OFF".
The symbol "   " denotes the copier is not completely de-energized but in a stand-by 
condition at this "POWER" switch position.
If your copier is so marked, please read "I" for "ON" and "     " for "OFF".
Caution!
For a complete electrical disconnection, pull out the main plug.
The socket-outlet shall be installed near the equipment and shall be easily 
accessible.
Required in IEC-950 (EN 60 950) - Europe
 •  The equipment should be installed near an accessible socket outlet for easy disconnection.
Required in Appendix ZB of BS 7002 (En 60 950) — United Kingdom
MAINS PLUG WIRING INSTRUCTIONS
The mains lead of this equipment is already fitted with a mains plug which is either a non-rewireable
(moulded) or a rewireable type. Should the fuse need to be replaced, a BSI or ASTA approved fuse
to BS1362 marked            or 
         
and of the same rating as the one removed from the plug must
be used.
Always refit the fuse cover after replacing the fuse on the moulded plug. Never use the plug without
the fuse cover fitted.
In the unlikely event of the socket outlet in your home not being compatible with the plug supplied
either cut-off the moulded plug (if this type is fitted) or remove by undoing the screws if a rewireable
plug is fitted and fit an appropriate type observing the wiring code below.
DANGER: The fuse should be removed from the cut-off plug and the plug destroyed immediately
and disposed of in a safe manner. Under no circumstances should the cut-off plug be inserted
elsewhere into a 13A socket outlet as a serious electric shock may occur.
To fit an appropriate plug to the mains lead, follow the instructions below:
IMPORTANT: The wires in this mains lead are coloured in accordance with the following code:
GREEN-AND-YELLOW:
Earth
BLUE:
Neutral
BROWN:
Live
As the colours of the wires in this mains lead may not correspond with coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured GREEN-AND YELLOW must be connected to the terminal in the plug
which is marked with the letter E, or by the safety earth symbol 
, or coloured green or green-
and-yellow.
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter
N or coloured black.
The wire which is coloured BROWN must be connected to the terminal which is marked with the
letter L or coloured red.
If you have any doubt, consult a qualified electrician.
WARNING: THIS APPARATUS MUST BE EARTHED.
➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣
➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣
➣➢➣➢➣➢➣➢➣➢➣
➣➢➣➢➣➢➣➢➣➢➣➢➣➢
➣➢
➣➢
➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣
➢➣
➢➣
➢➣
➢➣➢➣➢➣➢➣➢➣➢➣
➢➣➢➣➢➣➢➣➢➣➢➣➢
➢➣➢➣➢➣
➢➣➢➣➢➣➢➣➢➣➢➣
➢➣➢➣➢➣➢➣➢➣➢➣➢
1
Part 1: General Information
2
Page of 108
Display

Download Sharp AR-M165-207 (serv.man19) User Guide / Operation Manual

Here you can read online and download Sharp AR-M165-207 (serv.man19) User Guide / Operation Manual in PDF. AR-M165-207 (serv.man19) user guide / operation manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp AR-M165-207 (serv.man19) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.