Read Sharp AR-M155 (serv.man3) Service Manual online
AR-M150/M155/M155X MAINTENANCE 11 - 1
[11] MAINTENANCE
1. Maintenance table
: Check (Clean, adjust, or replace when required.)
: Clean
: Replace
: Adjust
✩
: Lubricate
2. Maintenance display system
3. Remaining toner indication
• The remaining toner indication is based on the number of revolutions of the toner motor.
• The toner END indication appears when the END is detected by the toner sensor.
Section
Parts
25K
50K
75K
100K
125K
Remark
Developing
Developer
DV blade
DV side seal (F/R)
DV side seal (F/R)
Process peripheral
Drum
Toner
Life
8K
Remaining quantity
NEAR EMPTY
About 10%
About 10%
EMPTY
LED
ON
Flash
Machine
Operation allowed
Stop
Developer
Life
25K
LED
ON at 25K of the developer count.
Machine
Selection is available between Not Stop and Stop by Service Simulation (SIM 26-37) Setup.
(If Stop is selected, the LED will flash and stop at 25K.)
∗
Default: Not Stop
∗
Clear: SIM 24-06
Maintenance
LED
Selection is available among 25K, 13K, 9K, 6K, 3K, and free (no lighting) with SIM 21-1.
∗
Default: 25K
∗
Clear: SIM 20-1
Machine
Not stop.
TONER FULL
Remaining toner indication
Display for users
100%
75%
50%
25%
Lo
LOW LEVEL
100-90%
89-75%
74-50%
49-25%
24-10%
10%
10 sheets
TONER CARTRIDGE
IS NEAR EMPTY
IS NEAR EMPTY
REPLACE THE
TONER CARTRIDGE
TONER CARTRIDGE
Displayed on the LCD.
Displayed on the LCD.
Click on the first or last page to see other AR-M155 (serv.man3) service manuals if exist.