Read Sharp AR-M150 Handy Guide online
User Programs
Version 1.0
Issue April 2004
16
SHARP ELECTRONICS (UK) LTD
DOCUMENT SYSTEMS SUPPORT
TECHNICAL SERVICES GROUP
Selecting a setting for a user program
1)
Press the [MENU] key and then press the [ENTER] key. In printer mode, the user programs are
accessed by simply pressing the [MENU] key.
2)
Press the [<] key [v] or [>] key [^] to select the item that you wish to configure in the USER
PROGRAM items, and then press the [ENTER] key.
• You can also select a program by directly entering the program
number with the numeric keys.
3)
• You can also select a program by directly entering the program
number with the numeric keys.
3)
Press the [<] key [v] or [>] key [^] to change the setting of the selected item.
NOTE:
• If you mistakenly select the wrong item, press the [CLEAR] key [C] and repeat the procedure from
step 2).
• To cancel a setting for a user program, press the [MENU] key.
4)
• If you mistakenly select the wrong item, press the [CLEAR] key [C] and repeat the procedure from
step 2).
• To cancel a setting for a user program, press the [MENU] key.
4)
Press the [ENTER] key. Your selection appears briefly and then the previous screen appears.
NOTE:
When "AE LEVEL ADJUST" is selected in the user programs and the [ENTER] key is pressed, the
automatic exposure adjustment screen appears. Adjust the exposure and press the [ENTER] key.
When "AE LEVEL ADJUST" is selected in the user programs and the [ENTER] key is pressed, the
automatic exposure adjustment screen appears. Adjust the exposure and press the [ENTER] key.
Audible signals (key entry beep, invalid key beep, base setting beep)
The machine sounds three different types of beep signals: a key entry beep that sounds when a valid
key is pressed, an invalid key beep that sounds when an invalid key is pressed, and a base setting
beep that sounds when a setting is the same as the base setting (base settings are explained below).
The base setting beep is initially disabled. If you wish to enable the base setting beep, see "SOUND
AT DEFAULT". If you wish to change the volume of the beep signals or disable them, see "KEY
TOUCH SOUND".
The beep patterns of each type of beep signal are as follows:
Key entry beep:
The machine sounds three different types of beep signals: a key entry beep that sounds when a valid
key is pressed, an invalid key beep that sounds when an invalid key is pressed, and a base setting
beep that sounds when a setting is the same as the base setting (base settings are explained below).
The base setting beep is initially disabled. If you wish to enable the base setting beep, see "SOUND
AT DEFAULT". If you wish to change the volume of the beep signals or disable them, see "KEY
TOUCH SOUND".
The beep patterns of each type of beep signal are as follows:
Key entry beep:
One beep
Invalid key beep:
Two beeps
Base setting beep:
Three beeps
Base settings
The base settings are preset standard selections for each copy setting.
The base settings are as follows:
Copy ratio:
100%
Light and Dark level:
Centre
Paper feed location:
Tray 1 (Upper paper tray)
AUTO/TEXT/PHOTO: AUTO
Click on the first or last page to see other AR-M150 service manuals if exist.