Read Sharp AR-LC5 (serv.man3) Service Manual online
AR-LC5 DISASSEMBLY, ASSEMBLY 6 - 2
(2) Paper feed roller, pick-up roller
1) Remove the resin ring A and the bearing B, and lift the pick-up
roller unit C.
Remove the resin ring D, pull out the shaft E, remove the pick-up
roller lever R, and remove the paper feed roller G and the pick-up
roller H.
roller lever R, and remove the paper feed roller G and the pick-up
roller H.
Note: (*1) When installing the paper feed roller, take care of the
installing direction.
(The rib of the paper feed roller must be set toward the rear
frame.)
(The rib of the paper feed roller must be set toward the rear
frame.)
(*2) When installing the paper feed clutch, check that the clutch
stopper is caught by the pawl.
(3) Reverse roller
1) Remove the resin ring A. Pull out the reverse roller unit B, and
remove the reverse roller C.
C. Control PWB
1) Remove the connector A, and remove the control PWB B.
A
C
B
2
1
D
F
G
E
H
[ a ]
The assembly method
A
B
C
B
A
Click on the first or last page to see other AR-LC5 (serv.man3) service manuals if exist.