AR-FX5 (serv.man6). ARFX5-Operation Manual - Sharp Copying Equipment User Guide / Operation Manual. Page 78

Read Sharp AR-FX5 (serv.man6) User Guide / Operation Manual online

8-6
Fax send settings
The fax transmission settings allow you to adjust certain
parameters for sending faxes to better suit your needs.
The fax send settings are as follows:
Auto reduction sending setting
Rotation sending setting
Printing page number at receiver
Call timer at memory sending
Date/own number print position setting
Recall in case of line busy
Recall in case of communication error
Times of recall setting or times of recall setting in
   case of line busy
Interval of recall setting
Quick on line sending
Auto reduction sending setting
This setting lets you select whether to have a transmitted
document reduced to match the size of the other
machine's printing paper. Auto reduction is normally
turned on. If the setting is turned off, documents are
sent in their original size. Because the size is not
adjusted to match the size of the printing paper, part of
the received document may be cut off.
Rotation sending setting
When transmitting a document, this setting allows
you to rotate a vertically oriented 8-1/2"x11" (A4)
document to a horizontal orientation (8-1/2"x11"R
(A4R)), or rotate a 5-1/2"x8-1/2"R (B5R or A5R)
document to 5-1/2"x8-1/2" (B5 or A5). The setting is
normally turned on, and documents are rotated
counterclockwise. (8-1/2"x11"R (A4R) documents
are not rotated.)
KEY OPERATOR PROGRAMS
ROTATION SENDING SETTING
ORIGINAL
SET
SENDING
DIRECTION
OK
A4R
A4
A5R
A5
B5R
B5
Rotation settings can be separately established for
different document sizes. To turn off a rotation setting,
touch the checkbox of the appropriate setting to
remove the checkmark.
Printing page number at receiver
This setting lets you select whether page numbers
are printed at the top of fax pages by the receiving
machine. The normal setting is to have page
numbers printed.
KEY OPERATOR PROGRAMS
Distinctive ring detection
This program can only be activated in Canada,
Australia, and New Zealand.
If multiple telephone numbers have been assigned to
your telephone line, the number called can be identified
by its ringing pattern. By using one number for voice
calls and another number for faxes, you can tell which
type of call you are receiving by the ringing pattern.
You can set your machine to automatically receive
faxes when your fax number is called by setting the
pattern that corresponds to your fax number. (Note
that in Canada, six selections are available.) Normally
OFF is selected.
Page of 88
Display

Click on the first or last page to see other AR-FX5 (serv.man6) service manuals if exist.