AR-FX5 (serv.man6). ARFX5-Operation Manual - Sharp Copying Equipment User Guide / Operation Manual. Page 3

Several points must be kept in mind when using this product as a facsimile.
Please note the following:

■

Information about settings and programming that are required before the fax functionality can be used is located in "Points
to Check and Programming after Installation" on page 1-2 of this manual. Please read this section and perform the
required settings and programming.

■

THIS PRODUCT CONTAINS A LITHIUM PRIMARY MEMORY BACK-UP BATTERY THAT MUST BE DISPOSED
OF PROPERLY. PLEASE CONTACT YOUR LOCAL SHARP DEALER OR AUTHORIZED SERVICE
REPRESENTATIVE FOR ASSISTANCE IN DISPOSING OF THIS BATTERY.
• When the battery dies, settings and programmed information will be lost. Be sure to keep a written record of the

settings and programmed information. (Refer to page 6-14.)

• The life of the lithium battery is approximately 5 years if the main switch and fax power switch are kept continually

off.

■

• If a thunderstorm occurs, we recommend that you unplug the power cord from the power outlet. Information will

be retained in memory even if the power cord is unplugged.

Thank you for purchasing this product. This manual only explains the facsimile functions of the product. For information
on loading paper, replacing toner cartridges, clearing paper jams, handling peripheral units, and other printer-related
information, please refer to your "Operation manual (for printer operation and general information)".
Additional manuals have been provided for copy and network scanner features. Please refer to these as necessary.
This manual assumes that several options have been installed.

Fax functions cannot be used when the power is
turned off.

TEL

LINE

NOTE
In this manual, American spellings are used.