Read Sharp AR-FX11 (serv.man2) Service Manual online
AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-54
U.S.A.: U.S.A.
CA: Canada
U.K: U.Kingdom
GR: German
FR: France
134
1
Summer time
Used to set whether the summer time is automatically set
or not.
or not.
0
0
1
1
1
Follow the
destination.
destination.
YES
2
Receive rejection
record
record
Used to set whether the rejected record is remained on
the communication report or not when receive is rejected
by the receive rejection function.
the communication report or not when receive is rejected
by the receive rejection function.
0
0
0
0
0
Recorded
3,4 Time until resetting
when G3 DIS
cannot be received
in V.8 phase.
cannot be received
in V.8 phase.
When send is made via a satellite, if the DIS signal is not
acknowledged, the receive level is adjusted again and
receive is tried again. This setting is used to set the time
until resetting.
acknowledged, the receive level is adjusted again and
receive is tried again. This setting is used to set the time
until resetting.
0
0
0
0
0
10s
1
1
1
1
1
5
Report table output
when in receive
rejection
when in receive
rejection
Used to set whether the communication report is
outputted or not when receive is rejected with the receive
rejection function. ”Output” is enabled only when SW134-
2 is set to “0”.
outputted or not when receive is rejected with the receive
rejection function. ”Output” is enabled only when SW134-
2 is set to “0”.
0
0
0
0
0
Not output
6
Sheet count
method in case of
an error
method in case of
an error
Used to set whether an error page is included in the send
quantity count in FAX send or not. The default is: an error
page is not counted.
quantity count in FAX send or not. The default is: an error
page is not counted.
0
0
0
0
0
Send error
pages are
not included.
pages are
not included.
7
Not used
0
0
0
0
0
8
YES/NO of quick
memory send
setting
memory send
setting
Used to set whether the quick memory send ON/OFF is
displayed on the menu or not.
displayed on the menu or not.
1
1
1
1
1
Setting is
displayed.
displayed.
135 1-4 Scanner resource
securing time out in
direct send
direct send
Used to set the time out of the scanner warm-up time in
direct send.
Binary input
20 - 50 sec
direct send.
Binary input
20 - 50 sec
0
0
0
0
0
26sec
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
5
Energy-saving
reset with an
external TEL
reset with an
external TEL
Used to set whether the machine is reset from the
energy-saving mode or not when the hand set of the
external telephone is lifted in the energy-saving mode.
The default is: Not reset in Japan only.
energy-saving mode or not when the hand set of the
external telephone is lifted in the energy-saving mode.
The default is: Not reset in Japan only.
1
1
1
1
1
Reset
(Complete
reset)
(Complete
reset)
6
Not used
0
0
0
0
0
7
External auditor
check
check
Used to set whether Enable/Disable of the FAX
department management when an external auditor is
used. The default is Disable.
department management when an external auditor is
used. The default is Disable.
0
0
0
0
0
Check
8
Not used
0
0
0
0
0
136
1
RTC error
adjustment
adjustment
Used to correct advancement of the clock. The default is
No Correction.
No Correction.
0
0
0
0
0
No error
adjustment
adjustment
SW
No.
Bit
No.
Item
Switch serection and function
U.S.A.
CA
U.K
GR
FR
Initial value
Key operator
1
Enable
0
Disable
1
Not recorded
0
Recorded
Bit No.
3
4
8s
0
0
10s
0
1
12s
1
0
14s
1
1
1
Output
0
Not output
1
Send error pages are
included.
included.
0
Send error pages are
not included.
not included.
1
Setting is displayed.
0
Setting is not
displayed.
displayed.
1
Reset (Complete
reset)
reset)
0
Not reset (Only 24V
is reset.)
is reset.)
1
Not check
0
Check
1
Error adjustment
0
No error adjustment
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 54 ページ 2004年11月12日 金曜日 午後2時24分
Click on the first or last page to see other AR-FX11 (serv.man2) service manuals if exist.