AR-FN6. Service Manual - Sharp Copying Equipment Service Manual (repair manual). Page 10

AR-FN6 MACHINE OPERATION-1

When using the stapling function, select "Properties" on the printer driver setting screen, open the "Main" tab shown in the right illustration, and then

select "Left", "Right" or "Top " at "Binding Edge" and "1 Staple" or  "2 Staples" in the "Staple" drop down.

NOTES:

•The settings screens above will appear only if the devices have been set properly in the printer driver.

•The combination of paper selection and other functions may not be compatible. For instance, if heavy paper, envelopes, label stock, etc. are selected,

it will not be possible to select duplex, offset tray, saddle stitch, etc.

The illustration below shows the screen for a PCL printer driver in the Windows 98 environment.

If you touch the [OUTPUT] key on the copy mode basic screen, a screen for selecting the sort/group/staple sort functions and selecting an exit tray will
appear.

If this function is selected, all copies of the same original will be grouped.
2 : [STAPLE SORT] key

If this function is selected, sorted copies will be stapled and delivered to

the offset tray. (not offset stacked)
3 : [SORT] key

If this function is selected, each set of copies will be sequentially

delivered.
4 : Icon display

The icon of the selected function (sort, staple sort or group) is displayed.

5 : [OFFSET] key
If this function is selected (checked), the offset function will be enabled. If

the check mark is cleared, the offset function will be disabled. (If the

staple sort function is selected, the check mark of the offset function will
be automatically cleared.)

If the offset tray is selected, printed sheets will be delivered to the offset
tray. (If the staple sort function is selected, the offset tray will be

automatically selected.)

7 : [TOP TRAY] key
If the top tray is selected, printed sheets will be delivered to the top tray.

Press to close this screen and to return to the basic screen.

*

If a function is selected, the corresponding key will be highlighted.

OK

STAPLE 

SORT

OUTPUT

GROUP

SORT

OFFSET 
TRAY

TOP TRAY

OFFSET

1

2

3

4

5

6

7

8