Read Sharp AR-FN5 (serv.man5) Service Manual online
1-A-5
B. Paper exit unit
1) Remove the alignment unit.
1-B-1
1-B-2
2. Stapler unit
1) Remove the alignment unit.
2-1
3. Paper exit unit and each roller
Move down the offset tray unit to the bottom, and remove the paper
exit unit from the copier.
Then remove the rollers from the paper exit unit.
exit unit from the copier.
Then remove the rollers from the paper exit unit.
Procedures to move down the offset tray unit to the bottom
When turning on the power, lift the paper holding lever which
detects the top of the tray with your fingers.
When the tray reaches the bottom, turn off the power. (When
the lever moves about half of the moving distance, you may
release your fingers, and the tray will fall to the bottom.)
detects the top of the tray with your fingers.
When the tray reaches the bottom, turn off the power. (When
the lever moves about half of the moving distance, you may
release your fingers, and the tray will fall to the bottom.)
3-1
3-2
1)
1)
2)
1)
2)
3)
1)
2)
Click on the first or last page to see other AR-FN5 (serv.man5) service manuals if exist.