Read Sharp AR-FN3 (serv.man17) Technical Bulletin online
ARE227
Sharp Electronics (UK) Ltd., Technical Services Group
(*1) Interchangeability: 0EUGID0425L// (the old paper delivery paper guide lower) and
0EUPLT0488L0I (paper delivery roller reinforcement plate AS) as a pair are
interchangeable with 0EUGID0425LZ3 (new paper delivery paper guide lower).
3. Action:*2
From mid-October 1999 production for machines bound for the US general sales
agencies.
From December 1999 production for machines bound for other market destinations.
3. Change carried out in the method of securing the staple tray harness.
1. Model Name:
ARFN1N
2. General:
There is a possibility of the harness in the stapler unit of model ARFN1N becoming caught
in those rare cases when the short tray mylar sheet of the short cut gate was pushed into
the cut-away section of the staple tray while JAM release action was carried out. As a
measure to alleviate this problem, a change has been carried out in the method of
securing the staple tray harness so that it does not get caught.
3. Action:
From January 2000 production.
4. Change carried out in the no. 3 paper delivery tray.
1. Model Name:
ARFN1N/FN3
2. General:
Previously only the paper delivery tray 3 of the AB series of model ARFN3 had holes
opened so that an extension wire tray could be attached, but now a change has been
carried out so that the paper delivery tray 3 of the inch series of model ARFN3, and of
model ARFN1N also have the holes. This action has been carried out as a measure to
establish uniformity.
Click on the first or last page to see other AR-FN3 (serv.man17) service manuals if exist.