Read Sharp AR-FN2 (serv.man21) Technical Bulletin online
4. As a measure to alleviate problems of the adjustment screws of the base plate cover
casters becoming dislodged, packing tape has been used to affix them.
casters becoming dislodged, packing tape has been used to affix them.
5. A change has been carried out in the colour of the de-curler in the transport mechanism
section of the machine. This change has been carried out as a measure to distinguish
between the de-curler and the pulley of the bundle delivery mechanism section. The colour
of the de-curler has been changed from black to blue.
6. There was a possibility of interference to the side face of the attachment holes caused
by looseness of the casters. As a measure to alleviate this problem a change in the
dimensions of the holes in the base plate and the caster rail have been carried out.
section of the machine. This change has been carried out as a measure to distinguish
between the de-curler and the pulley of the bundle delivery mechanism section. The colour
of the de-curler has been changed from black to blue.
6. There was a possibility of interference to the side face of the attachment holes caused
by looseness of the casters. As a measure to alleviate this problem a change in the
dimensions of the holes in the base plate and the caster rail have been carried out.
4.Action:
*
1 to 4
:From the 1st lot of October 1998 production.
5
:From mid-production October 1998 .
6
:From mid-production December 1998.
ARE137
Sharp Electronics (UK) Ltd., Technical Services Group
Base plate cover
Added filament tape
Changed position of the caster holes
Changed dimensions of the caster holes
Click on the first or last page to see other AR-FN2 (serv.man21) service manuals if exist.