Read Sharp AR-FN1 (serv.man6) Service Manual online
9. Elevator wires, top and bottom
[Note] If the tray 3 is not at the upper limit position, turn the knurled
part on the shaft A in the sketch and move the tray 3 to the
upper limit position.
upper limit position.
[Note] Remove the two screws 13) and:
1) Move the off-set tray to the lower limit position.
2) Turn the knurled part on the elevator worm gear shaft under the
elevator drive box so that the D-cut surface on the winding pulley
points upward.
points upward.
[Note] Remove the elevator wires (top, bottom) at the rear frame
side in the same manner.
2)
5)
2)
1)
1)
3)
4)
6)
5)
5)
5)
4)
(A)
7)
8)
7)
7)
7)
7)
8)
8)
8)
8)
9)
8)
10)
11)
10)
10)
12)
13)
13)
12)
15)
16)
17)
18)
A
B
C
14)
5 – 6
Click on the first or last page to see other AR-FN1 (serv.man6) service manuals if exist.