AR-FN1 (serv.man6). ARFN1 Service Manual-Disassembly and Reinstallation - Sharp Copying Equipment Service Manual (repair manual)

ar-fn1 (serv.man6) service manual
Model
AR-FN1 (serv.man6)
Pages
10
Size
1.35 MB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / ARFN1 Service Manual-Disassembly and Reinstallation
File
ar-fn1-sm6.pdf
Date

Read Sharp AR-FN1 (serv.man6) Service Manual online

SERVICE MANUAL
3-TRAY FINISHER
MODEL
 AR-FN1
SHARP CORPORATION
Parts marked with "
" is important for maintaining the safety of the set. Be sure to replace these parts with specified
ones for maintaining the safety and performance of the set.
[ 1 ] BASIC SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1-1
[ 2 ] UNPACKING AND INSTALLATION. . . . . . . . . . . . . . . . . . . . . .  2-1
[ 3 ] PICTORIAL NOMENCLATURE . . . . . . . . . . . . . . . . . . . . . . . . .  3-1
[ 4 ] OUTLINE OF OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-1
[ 5 ] DISASSEMBLY AND REINSTALLATION . . . . . . . . . . . . . . . . .  5-1
[ 6 ] ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6-1
[ 7 ] MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-1
[ 8 ] TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-1
[ 9 ] DESCRIPTION OF CIRCUITS. . . . . . . . . . . . . . . . . . . . . . . . . .  9-1
[10] CIRCUT DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10-1
CONTENTS
(Danish)
ADVARSEL !
Lithiumbatteri – Eksplosionsfare ved fejlagtig håndtering.
Udskiftning må kun ske med batteri
af samme fabrikat og type.
Levér det brugte batteri tilbage til leverandoren.
(English)
Caution !
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to manufacturer’s instructions.
(Finnish)
VAROITUS
Paristo voi räjähtää, jos se on virheellisesti asennettu.
Vaihda paristo ainoastaan laitevalmistajan suosittelemaan
tyyppiin. Hävitä käytetty paristo valmistajan ohjeiden
mukaisesti.
(French)
ATTENTION
Il y a danger d’explosion s’ il y a remplacement incorrect
de la batterie. Remplacer uniquement avec une batterie du
même type ou d’un type équivalent recommandé par 
le constructeur.
Mettre au rebut les batteries usagées conformément aux
instructions du fabricant.
(Swedish)
VARNING
Explosionsfara vid felaktigt batteribyte.
Använd samma batterityp eller en ekvivalent
typ som rekommenderas av apparattillverkaren.
Kassera använt batteri enligt fabrikantens
instruktion.
CAUTION FOR BATTERY REPLACEMENT
[5] DISASSEMBLY AND REINSTALLATION 
[Note]
This section explains the procedure for disassembling and rein-
stalling the unit. Reinstall the unit in the reverse order of disassem-
bly.
Disassemble the unit in numerical order in each sketch.
This section covers the procedure for disassembling the following
major parts. For the other parts, refer to the Parts Guide.
No.
Part name
1
Main drive motor
2
Staple unit  movement motor
3
Reversion motor
4
Elevator motor
5
Off-set motor
6
Stapler
7
Jogger motor
8
Pusher motor
9
Elevator wires, top and bottom
10
Paper discharge roller 3
1. Main drive motor
2. Staple unit movement motor
1)
2)
3)
4)
5)
6)
5)
1)
2)
3)
1)
1)
2)
1)
4)
5)
4)
5 – 1
3. Reversion motor 
4. Elevator motor 
[Note] Before trying to remove the frame stay 6), make sure the tray
3 is at the upper limit position.
If the tray 3 is not at the upper limit position, turn the knurled
part on the shaft A in the sketch and move the tray 3 to the
upper limit. 
1)
2)
3)
1)
1)
2)
1)
4)
5)
4)
1)
2)
3)
4)
(A)
5)
6)
5)
5)
5)
5)
7)
7)
7)
7)
7)
5 – 2
Page of 10
Display

Download Sharp AR-FN1 (serv.man6) Service Manual (Repair Manual)

Here you can read online and download Sharp AR-FN1 (serv.man6) Service Manual in PDF. AR-FN1 (serv.man6) service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp AR-FN1 (serv.man6) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.