Sharp Electronics (UK) Ltd., Technical Services Group
08 August 2000
1 of 1
There was a possibility of abnormal noise occurring due to vibrations which were
transferred to the No. 3 paper delivery guide from the No. 3 bin tray paper delivery roller
shaft. The vibrations were caused by contact between the paper delivery roller shaft and
the paper delivery guide, due to paper delivery guide attachment deviance and tolerance,
and a lack of sufficient space between the two parts. As a measure to alleviate this
problem, a change has been carried out in the shaft protect sheet. The new shaft protect
sheet has a cushion attached to it as a means of insulating the vibrations from the paper
delivery roller shaft.
Action has been carried out from 2000 April production.
Version P/G No.
4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
5. Interchangeable if replaced with same types of
related parts in use.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
Parts marked with "
" is important for maintaining the safety of the set. Be sure to replace these parts with specified ones for
maintaining the safety and performance of the set.
ABNORMAL NOISE IN THE
PAPER DELIVERY ROLLER