AR-F200 (serv.man58). Countermeasure against soiling of upper heat roller. - Sharp Copying Equipment Technical Bulletin (repair manual). Page 2

DCE213

Sharp Electronics (UK) Ltd., Technical Services Group

1.  Remove the fusing rear paper guide from the fusing unit.
2.  Clean the cleaning felt attaching the surface on the fusing rear paper guide with alcohol.
3.  Insert the projections (4 places / 8 pcs) on the back of the cleaning felt AS into the holes (arrow sections) on the

fusing rear paper guide to attach it.

* The cleaning felt attaching position is restricted by the projections.
* After attaching the cleaning felt AS, press the sheet metal section to attach the double-sided adhesive tape

securely.

Bend the flat projection of the cleaning felt AS, which overhang the surface of the fusing paper guide.  Moreover,
check that the curved projections are hooked securely.

Note: 1. Clean the dirty heat roller before mounting the fusing rear paper guide (with cleaning felt AS).

2. When mounting the fusing rear paper guide in the fusing unit, be careful no to damage the upper heat

roller by the release claw.

Refer to

main section

All

[7] -
[9] -

-

CPLTM0255QS01

AS

Cleaning felt
AS

Mid- Feb

01

6

<Interchange>
1. Interchangeable.

4. Not interchangeable.

2. Current type can be used in place of new type.
   New type cannot be used in place of current type.

5. Interchangeable if replaced with same types of related parts in used.

3. Current type cannot be used in place of new type.
   New type can be used in place of current type.

6. Others.

Parts marked with “         ” is important for maintaining the safety of the set.  Be sure to replace these parts with specified ones for maintaining the safety and
performance of the set.