Read Sharp AR-F151 Handy Guide online
Copier Trouble Code List
Version 2.0
Issue 05/00
18
SHARP ELECTRONICS (UK) LTD
COPIER TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Fax Error codes
TRANSMISSI
ON ERROR
ON ERROR
RECEPTI
ON
ERROR
ON
ERROR
E-0
Able to recognise handshake signal,
but it has errors. (The bit stream after
flag has some error)
but it has errors. (The bit stream after
flag has some error)
E-0
Able to recognise handshake signal, but it has
errors. (The bit stream after flag has some
error)
errors. (The bit stream after flag has some
error)
E-1
Cannot recognise the handshake
signal from the receiver side.
(*NFS/DIS)
signal from the receiver side.
(*NFS/DIS)
E-1
Line disconnected during reception.
(*NSS/DCS)
(*NSS/DCS)
E-2
Line disconnected during transmission.
(*CFR)
(*CFR)
E-2
Cannot recognise the handshake signal from
the transmitter side. (*NSC/DTC)
the transmitter side. (*NSC/DTC)
E-3
Line disconnected after modem speed
fall back. (*FTT)
fall back. (*FTT)
E-3
Cannot recognise the last handshake signal
from the transmitter side. (*EOP)
from the transmitter side. (*EOP)
E-4
Line disconnected during multi-page
transmission. (*MCF)
transmission. (*MCF)
E-4
Cannot recognise the handshake signal for
next page from the transmitter side in the case
of mode change. (*EOM)
next page from the transmitter side in the case
of mode change. (*EOM)
E-5
Not defined
E-5
Cannot recognise the handshake signal for
next page from transmitter side. (*MPS)
next page from transmitter side. (*MPS)
E-6
Cannot recognise the handshake
signal for next page at
receiver side. (*RTN/RTP)
signal for next page at
receiver side. (*RTN/RTP)
E-6
Not defined
E-7
"Disconnect signal" is received at
transmitter side. (**DCN)
transmitter side. (**DCN)
E-7
"Disconnect signal" is received at receiver
side. (**DCN)
side. (**DCN)
E-8
Error was not corrected after the
predetermined number of retries
because of an error in a part of a page.
(*PPR)
predetermined number of retries
because of an error in a part of a page.
(*PPR)
E-8
Error occurred upon completion of reception of
all pages. (*PPS-EOP)
all pages. (*PPS-EOP)
E-9
Not defined
E-9
Error occurred when mode was changed or
transmission/reception switching was
performed. (*PPS-EOM)
transmission/reception switching was
performed. (*PPS-EOM)
E-10
Not defined
E-10
Error occurred during partial page or physical
page reception. (*PPS-MPS/NULL)
page reception. (*PPS-MPS/NULL)
E-11
Not defined
E-11
Not defined
E-12
Error occurred just after fall-back
(*CTR)
(*CTR)
E-12
Error occurred during or just after fallback.
(*CTC)
(*CTC)
E-13
Error occurred after a response to a
retransmission end command was
received. (*ERR)
retransmission end command was
received. (*ERR)
E-13
Error occurred after retransmission end
command was received. (*EOR)
command was received. (*EOR)
Click on the first or last page to see other AR-F151 service manuals if exist.