Read Sharp AR-F151 (serv.man16) User Guide / Operation Manual online
INITIAL SETTINGS
2-3
Adjust the ringing volume of the unit using the procedure below.
Factory setting: 3 (MEDIUM)
Step
Press these keys
Comments
1
“OPTION SETTING” will appear in
the display.
the display.
2
“RINGING VOLUME” will appear in
the display.
the display.
3
Press the or key to lower or raise
the volume to the desired level.
the volume to the desired level.
4
“STORED” will appear in the display.
5
Press the STOP key twice to exit.
Adjusting the Ringing Volume
FUNCTION
GHI
TUV
or
ENTER
STOP
STOP
You can select the length in seconds of the alarm beeps following the procedure
below.
below.
Factory setting: 1 (3SEC)
Step
Press these keys
Comments
1
“OPTION SETTING” will appear in
the display.
the display.
2
“BEEP LENGTH” will appear in the
display.
display.
3
Press the or key to set the alarm
beeps to the desired length or to turn
them off.
beeps to the desired length or to turn
them off.
4
“STORED” will appear in the display.
5
Press the STOP key twice to exit.
Setting the Length of Alarm Beeps
FUNCTION
GHI
JKL
or
ENTER
STOP
STOP
02_INITAL.p65
3/22/00, 2:39 PM
3
Click on the first or last page to see other AR-F151 (serv.man16) service manuals if exist.