AR-F13 (serv.man2). AR-F13 Service Manual - Sharp Copying Equipment Service Manual (repair manual). Page 7

Read Sharp AR-F13 (serv.man2) Service Manual online

AR-F13  UNPACKING AND INSTALLATION  3-2
4) Attach the staple unit to the finisher.
<1> Open the front cover of the saddle finisher.
<2> Remove the two pieces of packing tape from the staple unit.
<3> Hold the handle and the bottom side of the staple unit, and
insert the unit into the saddle finisher.
<4> Close the front cover of the saddle finisher.
5) Attach the front cover to the saddle finisher.
<1> Put the plate R to the saddle finisher so that marking R is
positioned up and then secure the plate with two screws A.
<2> Put the front cover to the saddle finisher as shown in the illus-
tration and secure the cover with two screws B at the upper
part and two screws A at the lower part (four screws in total).
6) Attach the exit tray to the saddle finisher.
<1> Put the two pawls of the exit tray onto the saddle finisher.
<2> Secure the exit tray with four screws E.
At this time, ensure that the positioning dowel is securely
inserted.
7) Attach the connecting plate to the saddle finisher.
<1> Insert the connecting plate into the sheet metal at the lower
part of the saddle finisher.
<2> Secure the connecting plate to the saddle finisher with two
screws A.
Packing tape
Packing tape
Screws A
Screws B
Front cover
Screws A
Plate R
Pawl
Pawl
Screws E
Positioning dowel
Connecting plate
Screws A
Page of 64
Display

Click on the first or last page to see other AR-F13 (serv.man2) service manuals if exist.