Read Sharp AR-F13 (serv.man2) Service Manual online
AR-F13 UNPACKING AND INSTALLATION 3-1
[3] UNPACKING AND
INSTALLATION
1. AR-F13
<Before installation>
• Start installation after checking that the DATA indicator on the oper-
ation panel is neither lit nor blinking.
• For installation of AR-F13, an optional stand (AR-D17, AR-D18 or
AR-D19) and a duplex bypass/inverter unit (AR-RB1) must have
been installed.
been installed.
• Ensure that the connecting plate on the front of the optional stand
and the two supplied connection plates are securely attached.
1) Turn off the main switch.
<1> Turn the main switch located at the left side of the main unit
to the "OFF" position.
<2> Remove the power plug from the outlet.
2) Remove the actuator.
<1> While holding the base of the exit actuator of the duplex
bypass/inverter unit with one hand, pull the end of the exit
actuator with the other hand to remove the actuator.
actuator with the other hand to remove the actuator.
<2> If the exit tray is installed to the duplex bypass/inverter unit,
remove it.
3) Attach the lock plate and the grounding plate.
<1> Remove the screw from the rear side of the duplex bypass/
inverter unit.
<2> Put the lock plate to the duplex bypass/inverter unit and
attach it with screw C on the front side and with screw D on
the rear side.
the rear side.
<3> Remove the exterior securing screw, put the two grounding
plates to the main unit, and secure them with screws C (two
for each).
for each).
∗
At this time, attach the front grounding plate so that marking F is
positioned up.
positioned up.
Lock plate:
1 pc.
Grounding plate:
1 pcs.
Parts included
Connecting plate:
1 pc.
Screw A (M4 x 6):
4 pcs.
Screw E (M4 x 7):
4 pcs.
Screw C (M4 x 18):
5 pcs.
Screw D
(M4 x 18 with rosette):
1 pc.
Screw B (M4 x 10):
2 pcs.
Staple unit:
1 pc.
Exit tray:
1 pc.
Staple cartridge: 1 pc.
Staple position label:
1 sheet
punch position label:
1 sheet
Front cover:
1 pc.
"OFF"
Actuator
Screw
Screw C
Screw D
Exterior
securing screw
securing screw
Screws C
Grounding plate
Lock plate
<1>
<2>
<3>
Click on the first or last page to see other AR-F13 (serv.man2) service manuals if exist.